Watercooling my rig; suggestions.

Joined
Mar 30, 2006
Messages
2,578
Well, this is what I've got so far. I already have a triple rad grill installed on my v1200. So, based on some research the only thing i'm really confused on is what sort of radiator I should buy, as well pump and res. I've got my blocks all picked out, and i'm going to go with 1/2ID with my x2 4200+ and my 8800 GTS. I wont be cooling ram or NB at all. Anything you guys can recommend?
 
Swiftech MCR320 if you can find it.

BIP 3.120 if you can't find the swiftech :).


As for a res, I suggest a micro-res by swiftech.

Pump? Swiftech MCP655 or a Danger Den D5 (same pump, different brand), OR... petras modded MCP355 with the special delrin top is also a very nice contender.
 
Well, this is what I've got so far. I already have a triple rad grill installed on my v1200. So, based on some research the only thing i'm really confused on is what sort of radiator I should buy, as well pump and res. I've got my blocks all picked out, and i'm going to go with 1/2ID with my x2 4200+ and my 8800 GTS. I wont be cooling ram or NB at all. Anything you guys can recommend?

I've heard that the lower temp your NB is the lower temp your cpu will be. Is this true?
 
I've heard that the lower temp your NB is the lower temp your cpu will be. Is this true?

Only on air cooling.

Not a factor on water.

And really, it's only a very tiny factor on air.

It's because the hot air from the NB gets exhasted right in the CPU HSF.
 
Only on air cooling.

Not a factor on water.

And really, it's only a very tiny factor on air.

It's because the hot air from the NB gets exhasted right in the CPU HSF.


Not necessarily true. In computers about 20% of the heat is exhausted through "secondary losses". That is to say 20% of the heat is conducted through the pins and onto the motherboard. If you cool the NB more that means the NB is sending less secondary losses to the MB which might help keep the CPU cooler.

I doubt it really helps that much, but it does apply (whether it makes any difference or not) to watercooling as well.
 
Not necessarily true. In computers about 20% of the heat is exhausted through "secondary losses". That is to say 20% of the heat is conducted through the pins and onto the motherboard. If you cool the NB more that means the NB is sending less secondary losses to the MB which might help keep the CPU cooler.

I doubt it really helps that much, but it does apply (whether it makes any difference or not) to watercooling as well.

That's true too. If 20% is radiated through the underlying circuitry, then 80% is exhausted to air correct?

That's gotta be even less than the impact from increased air temperature lol...

Either way, from personal experience... Adding a JingTing forcetake NB cooler onto my old Asus board reduced my CPU temps by about 2c (I bent the heatpipe so it would be on the other side of my GPU). It's far enough away from the CPU that I'm starting to question the reason for the temp drop...
 
Also, what CPU and NB water blocks do you recommend? I'll post a picture of my shopping cart to see what else im missing. Thanks again guys!
 
Picture1.png



So, now i need tubing, ends (if thats what they're called? lol) and I also need fluid...plus of course my blocks.
 
TDX waterblock is great for that CPU.

The EK waterblock for the 8800 is great.

Any barbs (or ends as you called them) will do, but most blocks come WITH barbs.

7/16" masterkleer tubing is your best bet for tubing.

As for fluid... I use Distilled water and Pentosin additive.
 
TDX waterblock is great for that CPU.

The EK waterblock for the 8800 is great.

Any barbs (or ends as you called them) will do, but most blocks come WITH barbs.

7/16" masterkleer tubing is your best bet for tubing.

As for fluid... I use Distilled water and Pentosin additive.

Cool, thanks ill add those to my list. ^_^ Thanks for my help on my temp air solution
 
Back
Top