Hi all, first post here. I was leak testing and found two of my EK rotary fittings were leaking badly, one on the GPU and one on the CPU block. I immediately turned off the pump and put more paper towels down but it was a decent size puddle of water, there was water in the ram slots and basically the top half of the motherboard was soaked. My PC was completely powered off, only had the pump connected via molex.
I inspected everything and there appear to be stains from the water on the video card PCB. I tried cleaning the water stains with a microfiber cloth and it didn't really do much. Motherboard seems to be free of water spots.
I took apart everything and allowed it to dry in front of a fan for four days. Am I totally screwed with those stains on the PCB like that? Don't have photos of the damage at the moment, I can upload them later this evening. Thanks in advance for any advice.
My setup:
SLI 1080 Ti FE
ASUS Maximus IX Formula
i7 7700K
64GB G.Skill RAM
EK Surpemacy EVO
EK PETG tubing
EK TItan X waterblocks (purchased before the 1080 Ti block became available)
CaseLabs SMA8
Hardware Labs GTR 480 radiator
I inspected everything and there appear to be stains from the water on the video card PCB. I tried cleaning the water stains with a microfiber cloth and it didn't really do much. Motherboard seems to be free of water spots.
I took apart everything and allowed it to dry in front of a fan for four days. Am I totally screwed with those stains on the PCB like that? Don't have photos of the damage at the moment, I can upload them later this evening. Thanks in advance for any advice.
My setup:
SLI 1080 Ti FE
ASUS Maximus IX Formula
i7 7700K
64GB G.Skill RAM
EK Surpemacy EVO
EK PETG tubing
EK TItan X waterblocks (purchased before the 1080 Ti block became available)
CaseLabs SMA8
Hardware Labs GTR 480 radiator