Hello all, I am most likely going to get this for my water cooling setup. The problem is that I have a Antec P183 case. The back of the case only has 1 120mm fan and the water cooling holes are on top of each other and not side by side below the fan. Is there anyway where I can mount the radiator to the case securely without much modding? Thanks!!!
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
-
Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.
water cooling setup
- Thread starter HAF72
- Start date
AdvanSuper
Gawd
- Joined
- Jun 2, 2010
- Messages
- 826
Take a look here - http://www.evga.com/forums/tm.aspx?m=615119&mpage=1
There are quite a few options on what you can do and there are links to mounts that can be purchased.
You can just get two right angle rotary fittings of your choice and run the tubing along the side of the rad and into the holes. It should work fine.
For reference http://www.performance-pcs.com/cata...t_info&cPath=59_346_830_446&products_id=29102
There are quite a few options on what you can do and there are links to mounts that can be purchased.
You can just get two right angle rotary fittings of your choice and run the tubing along the side of the rad and into the holes. It should work fine.
For reference http://www.performance-pcs.com/cata...t_info&cPath=59_346_830_446&products_id=29102
