Water Cooling for Conroe 6600 Overclock

I

Icemastr

Limp Gawd
Joined
Jun 28, 2005
Messages
198
I am going to get a conroe E6600 CPU pretty soon and I currently have water cooling on my athlon XP. I want to overclock to 4ghz and since I need to get a new waterblock I wanted to know if there were any other parts I should get to overclock to 4ghz. Currently I have a Pabst 120mm fan that is rated at 56cfm but it seems to be dieing on me so I ordered 2 Mechatronics fans rated at 57cfm and a new case since I needed one. I have a Black Ice pro 120 mm radiator, fill port reservoir, danger den CSP Mag pump, and 3/8id tubing only cooling the cpu. What waterblock do you guys recommend for the CPU and should I consider adding or replacing any other parts to my system?
 
Check it out.

Looks like the Swiftech G4 Storm will get you very close. You might want to ask those
dudes if they are water cooling only their CPU or not.
 
Its likely a swiftech apogee, although it has mixed feelings around this and other forums, would net you similar results (within a few degrees c) with less restriction and a lower price.
 
You must log in or register to reply here.
Back
Top