So after spending a nice hunk of change trying to cool things down, I'd figure I would ask here.
Specs:
San Diego 3700+ @ stock
MSI Neo4 Platinum SLI
36GB Raptor
250GB Maxtor
1xeVGA 6800GT
1024 MB (2x512) OCZ Platinum El Rev 2.
OCZ Powerstream 520
With my stock HSF, I was seeing idle temperatures of ~47-48C. I then replaced the stock heatsink with the heatsink my friend had for his X2, which pushed temps down to about 45C. After that, I decided to just get the XP-120 w/ 120 mm medium speed panaflo and be done with it. I put it on, idle temps are now at about 42C (~46 load). Figuring it was an airflow problem, I replaced all the fans in my Lian-Li PC-60 with 80mm medium speed panaflos, which dropped the temps another 2C (now at 40C idle/43 load). The northbridge reads at 37C, and the drives at 30C and 32C. I've reseated the XP-120 about 5 times now, replacing the AS5 (small dab in the middle), and then the most recent attempt was with ceramique. Ceramique seemed to be working the best for me. Am I just being Unrealistic? With the sides of the case off, I idle at about 36C. Ideas? I see people posting idle temps below 30 with similiar setups, and I cant fathom how they are doing it. My room is at about 27C. The next thing I'm thinking about doing is modding the bottom of the case to take a 120mm fan w/ some nice coasters. My wire management is excellent and it certainly isnt the problem.
Specs:
San Diego 3700+ @ stock
MSI Neo4 Platinum SLI
36GB Raptor
250GB Maxtor
1xeVGA 6800GT
1024 MB (2x512) OCZ Platinum El Rev 2.
OCZ Powerstream 520
With my stock HSF, I was seeing idle temperatures of ~47-48C. I then replaced the stock heatsink with the heatsink my friend had for his X2, which pushed temps down to about 45C. After that, I decided to just get the XP-120 w/ 120 mm medium speed panaflo and be done with it. I put it on, idle temps are now at about 42C (~46 load). Figuring it was an airflow problem, I replaced all the fans in my Lian-Li PC-60 with 80mm medium speed panaflos, which dropped the temps another 2C (now at 40C idle/43 load). The northbridge reads at 37C, and the drives at 30C and 32C. I've reseated the XP-120 about 5 times now, replacing the AS5 (small dab in the middle), and then the most recent attempt was with ceramique. Ceramique seemed to be working the best for me. Am I just being Unrealistic? With the sides of the case off, I idle at about 36C. Ideas? I see people posting idle temps below 30 with similiar setups, and I cant fathom how they are doing it. My room is at about 27C. The next thing I'm thinking about doing is modding the bottom of the case to take a 120mm fan w/ some nice coasters. My wire management is excellent and it certainly isnt the problem.