Wall on 2400-M

[grantunderland]

I'm currently running my 2400-M at 180x12.5 @ 1.7v. but when i try a multi that is 13 or higher, the clock speed goes WAY down, like into the 900mhz area. is there anyway to compensate for that, as i have hit the wall on my fsb. temps are definartly not a problem, as load is about 45-47C

 

[Liqwid122]

its not your proc it is your board which doesn't like mults above 12.5

U can do a wire mod so it has 13 and up which work. I don't know how to do it though. Look it up.