W10 does not boot properly after BIOS reset to default.

K

Koko56

[H]ard|Gawd
Joined
Jan 8, 2007
Messages
1,342
Hi guys, and help on why w10 is not loading properly, after resetting bios settings and consequently getting rid od a cpu oc and rapid start? Rapid start was not there for the os install fwiw.

Windows loads, but then the ui doesn't react fully or at all to inputs. I have an ssd as boot and 2 hdds connected for storage.

Thanks in advance!
Edit: for some reason the SSD can't be chosen as a primary boot drive, has to be via override. Board is Z97-A.
 
Last edited:
A quick search showed this is common issue... Seems to be a BIOS / Mobo issue...
Fix #1 shut down the PC and unplug the power supply for 10-15 minutes.... Plug in and power it up... SSD should be in boot menu now...
Fix #2 in BIOS disable CSM (Compatibility Support Module) , reboot and Re enable CSM in BIOS then exit and save... SSD should noe show in BIOS...
Fix #3 Reflash to most Recent BIOS for mobo...
 
You must log in or register to reply here.
Back
Top