• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

**w Computer (Pictures)**

A

annaconda

[H]F Junkie
Joined
Apr 13, 2005
Messages
9,925
Specs:

Dell Ultra Sharp 24" LCD
Intel Conroe E6300 @ 4 (Target)
MSI 975X Powerup Edition. (BIOS 714)
2gig OCZ PC8000
Custome Made Water Cooling $300.
1. Sweiftech Pump.
2. Swiftech 3 X 120mm Radiator
3. Swiftech GPU Block
4. 1/2" Tubbing.

400 GB RAID 0
2 X 16XDVDWriters.
Ultra Computer Case.


Picture 023.jpg


Picture 147.jpg


Picture 169.jpg


Picture 168.jpg
 
Nice case! I have a black Aluminus for one of my servers. It was my water cooled case prior to me getting my U2-UFO.

Nice job! :cool:
 
I have a black aluminus. Is there not room for the rad in there or you just didnt want it to go in?
 
really awesome equipment but i have to agree that there could be better management of 'stuff' in your case.

is that pump just kinda sitting there like that?

there's room for improvement in your setup in terms of wiring / tubing...

how many 5.25 bays are available?
 
None 5.25 bay is available.

I got
2 X DVD writers.

1 Fan controller,
1 is holding all the cables.


So all 4 of them are full.
 
Here is my Aluminus during leak checking so some of the wire mess had not been cleaned up.



img1020largeok2.jpg
 
Umm you are hidding the down part of your table and i can see some wires going out of the case ;)

But nice work, you are using SATA drives i have IDE drives. You are not using lights i have some lights, so it all depends how much stuff you have in your system.

I even have HDTV Wonder you don;t so more stuff looks crappy, but i am buying SATAII hard drives i will try to clean some stuff up.

I also have to put the 80mm fan on the chip inorder to overclock it to the best, and motherboard requires power connector also, which makes some mess. So you have to consider all the factors in.
 
annaconda said:
Umm you are hidding the down part of your table and i can see some wires going out of the case ;)

But nice work, you are using SATA drives i have IDE drives. You are not using lights i have some lights, so it all depends how much stuff you have in your system.

I even have HDTV Wonder you don;t so more stuff looks crappy, but i am buying SATAII hard drives i will try to clean some stuff up.

I also have to put the 80mm fan on the chip inorder to overclock it to the best, and motherboard requires power connector also, which makes some mess. So you have to consider all the factors in.
Click to expand...

A little touchy are we?

The wire that you see in the front is the pump power wire going to a spare PSU for leak checking. One drive is sata and one is eide.
 
annaconda said:
Umm you are hidding the down part of your table and i can see some wires going out of the case ;)

But nice work, you are using SATA drives i have IDE drives. You are not using lights i have some lights, so it all depends how much stuff you have in your system.

I even have HDTV Wonder you don;t so more stuff looks crappy, but i am buying SATAII hard drives i will try to clean some stuff up.

I also have to put the 80mm fan on the chip inorder to overclock it to the best, and motherboard requires power connector also, which makes some mess. So you have to consider all the factors in.
Click to expand...
but still, you could prolly do just a leeeetle bit better than this -

Picture%20168.jpg


no?
 
WTF is up with putting E6300 @ 4Ghz in your sig ? Little bit optimistic or just plain lieing ?

I'll take this back if you get anywhere near 4 Ghz. Good luck with the 571 MHz FSB you'll need to reach.
 
Demon_of_The_Fall said:
WTF is up with putting E6300 @ 4Ghz in your sig ? Little bit optimistic or just plain lieing ?

I'll take this back if you get anywhere near 4 Ghz. Good luck with the 571 MHz FSB you'll need to reach.
Click to expand...

Like i said my target was 4ghz, but i am really really disappointed with CONROE. My last 805D can do 4ghz easily, so i was thinking might be CONROE will do better. :(
 
annaconda said:
Like i said my target was 4ghz, but i am really really disappointed with CONROE. My last 805D can do 4ghz easily, so i was thinking might be CONROE will do better. :(
Click to expand...
they are two COMPLETELY different architectures, the Conroe at 3 would would the 805 at 4GHz's ass hands down, and you are dissapointed? please, give me the chip then.
 
Didn't mean to be so harsh, but I hate epenis sigs. And the fact that you will never in a billion years get that E6300 to 4 Ghz. The motherboard would explode before you even had a chance to get near 570 FSB
 
LOL It wont explode but it wont happen on water eather, last e6300 i had did 3.6 on phasechange and wouldent move much past 530fsb...
 
ummm... can i have your computer's babies? dayum! haha... water cooling always looks so good... i should shell out a hundred extra dollars for it, but i'm so cheap. and that's a nice luxury 24" screen... kinda funny to me how monitors cost more than most good setups, but heck! if i had the money i'd splurge too. way to spend your hard earned cash man. props. :D
 
You must log in or register to reply here.
Back
Top