• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

voltages

E

eli

[H]ard|Gawd
Joined
Apr 30, 2003
Messages
1,648
do these voltages seem "Safe" for my new computer:

Vcore@1.63
DDRV@2.66
3.3@3.26
5FSB@5.0
-5@5.0

my system specs are:

Abit NF7-S
AMD barton 2500+
Sapphire 9800 Pro
Antec True Power 430
Lite-on DVD 16x, Kenwood 72x
WD Raptor
Mushkin pc3200 2x512

everything is stock.

thanks a lot!

Eli Morgan
 
Also, when I run Prime95, my CPU temp goes from around 40C to 50C. It also says my "sys" temp goes from 24C to 30C. What I am wondering is.....does "sys" mean your motherboard temperature, or your case temperature?

Is all this normal?
 
Well, you left off 5v and 12v so it's hard to say anyway, but it's rather moot anyway because those numbers came from a software based source, which are notoriously inaccurate. Use a multimeter and measure the voltages yourself to be sure.
 
sys temperature (I believe) normally means northbridge temperature, but usually that's pretty close to the ambient case temperature.

Erik
 
You must log in or register to reply here.
Back
Top