Voltage reading trouble and stuck OC'ing

[kevinjp]

Hey guys, this is my first time overclocking. Everything is working great so far how ever my cpu voltage temps don't give me accurate readings

I am using the i680 P5N32-E SLI with Q6600. Currently running 1250fsb x 9x @ 3.1250V with ram timings OC'd to 4-4-4-15-1T @ 2.125v

This runs stable how ever this is the readings I get in Coretemps and CPU-Z

It says in my mobo that my voltage is 1.31250v. I was running @ 1.3250 for a couple weeks and recently once I got my OC stable minized my voltages.

I know my mobo has set the voltage lower since my temps have gone down. Just can't figure out why core temps won't change and why CPU-Z is at some rediculous number.

EDIT: Also, I can't get past 1250 FSB. I made a jump to 1290 or 1300 once I set my voltage 4-5 settings up and got it to post how ever my windows froze when loading. Then I tried boosting my ram voltage but did not want to go past 2.2 How ever they were running at a slower clock then what I was able to get stable now. Any suggestions?

Thanks, kevin.

 

[jsgrabo]

Try these voltages:
cpu: 1.46250
fsb: 1.4
mem: 2.15
spp: 1.45

ive been able to run these @ fsb speed of 1451

 

[kevinjp]

still doesnt fix my problem with cpu-z and coretemps

 

[Luder[PAK9]]

coretemps only shows the default voltage for your chip, not the voltage set in the mobo. Can't help you with teh wacky CPUZ reading though.

 

[Ragenrok]

as far as I know software has never been able to report accurate on the voltages you have.