voltage Motherboard problem

Phil_needs_help

Weaksauce
Joined
Apr 6, 2005
Messages
124
hey I'm a new user...

I have a Tyan S2460 and I have recently installed the tyan system software which looks after my temps and voltages..

one thing i noticed was that the -12V cable on the power connector is showing as -13.103V, which seems to be alot higher in difference (from -12V) than any of the other voltage values i have e.g +12V,+5V etc.

is this ok?
 
Do you see these voltages in BIOS or did you get these from a Multimeter? THe dells that we have at my work is all like this, I think it should be fine. Try flashing your bios and see if it helps, if not get help from the guys over here:

http://www.hardforum.com/forumdisplay.php?f=93
 
Visually inspect your mainboards components...ie the caps and voltage regulators, those older SMP boards get recapped all the time...

Also look into what type of power supply you have...they do eventually die

MD
 
arhh thanks guys sorted it...i was using the tyan system monitor program - not a very good program

in BIOS it shows up as 12 point something volts...seems to be ok now
 
Back
Top