• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

volt mod Radeon 9500

A

archevilangel

[H]ard|Gawd
Joined
Jan 15, 2003
Messages
1,824
well I just improved my volt mod by replacing the 10k resistor with a pot, I am doing 1.91 volts, don't remember the default, max core is around 420s(<3 atitool) No pics yet until I dig up my digital camera.
 
nice i think the stock voltage to the gpu was 1.75?

later on tonight im going to be redoing my vmod to my 9500pro
 
actually I dont know what the stock voltage was, I started measuring the voltage when the pot was at 8k, and it was at 1.5something.
 
my n/p was just under 1.5 v for core... i hope you have some beefy cooling on that sucker :p
 
I have a copper cpu cooler on it, only a 60 mm fan though, I would buy a vga silencer but I dont feel like spending anymore money on it.
 
1.9x is pretty extreme for air cooling... most people don't recommend more than 1.7x o_O

but if it's stable more power to ya ;D
 
iv been using an old amd cpu heatsink. got the voltage down to 1.65 sotck is 1.5 still at 430core 335mem i put my dd5 temp moniter and it says that the back of the gpu is running at 91F idle and 101.5 load
 
You must log in or register to reply here.
Back
Top