• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

VMware + Netware 5 = no gigabit?

S

SpaceHonkey

Gawd
Joined
Jan 25, 2007
Messages
983
I'm not able to get gigabit speeds with Netware running on ESX. I'm using the PCNTNW.LAN drivers. Speeds seem to be only 100Mb...

Any ideas? Everything else on the host (other VMs) have no issues with network speeds.
 
I think I've fixed it by changing the drivers to CNEAMD. For those that find this later, here's the hardware settings to use if you use more than one nic:

NIC1 -
IRQ = 3
Addr = 300

NIC2 -
IRQ = 4
Addr = 320

Throughput is now ~50MB/s, much better than the 12.5MB/s I was getting.
 
Not sure if this applies to Netware, but installing the VMware tools on to your VM once you got everything set up should take care of the NIC speed.

At least in Windows VM's it does....:rolleyes:

edit: Looks like I was late to the party....sounds like progress! ;)
 
Yeah, VMware tools is a must with Novell. Without it Novell doesn't idle the processor so it sits pegged at 100%.

As a side note, restoring from tape is taking forever - about 550MB/min. Seems a bit slow to me...

Sure wish VCB supported Netware!
 
Yep, and now that it's virtualized who knows how long it'll be around ;) lol

We're going to move to OES2, but ancient hardware necessitated a move before we could engineer a new environment.
 
You must log in or register to reply here.
Back
Top