• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Vmware ESX build

nukleuz

[H]ard|Gawd
Joined
Oct 22, 2006
Messages
1,210
I'm trying to build an esx rack server and need help with the hardware to get,i have a budget of $1200 to spend on it and i already have 2tB hdd .I was thinking about just buying a dell but the are expensive
This is also going to be for a home lab for now

could you guys help me pls

thanks

this is what i configured on dell for it:

467-4248Core 2 Duo E6305, 1.86GHz, 2MBCache, 1066MHz Front Side Bus for PowerEdge R3001311-8351512MB DDR2, 667MHz, 1x512MB Single Ranked DIMMs1320-6326Riser with 2 Slots: 2 PCI Exprx8 slots1341-688080GB 7.2K RPM Serial ATA 3Gbps3.5-in Cabled Hard Drive1420-6320No Operating System1430-2008On-Board Dual Gigabit Network Adapter1313-61168X DVD-ROM Drive, Internal SATA1313-6114Bezel1330-0309Chassis with Cabled Hard Driveand Non-Redundant Power Supplyfor PowerEdge R3001330-0312Electronic Documentation and OpenManage DVD Kit1341-688080GB 7.2K RPM Serial ATA 3Gbps3.5-in Cabled Hard Drive1341-6341Add-in SAS6iR RAID Controller (SATA/SAS Controller) which supports 2 Hard Drives - RAID 11341-3089No Rack Rails Included, 1U1310-8509Power Cord, NEMA 5-15P to C14,15 amp, wall plug, 10 feet / 3 meter
 
Pff, buy a 1950 on ebay.
My budget was a little higher than yours (1800), but for $1699 I actually just bought another ESX host with the following specs.

Dual Quad Core's @ 1.86 Ghz
16GB of RAM
Dual Power supplies
PERC 5/I
with 2 73GB 15k rpm SAS drives

(I should mentioned it's still under Dell warranty until 06/2010)
 
I'm trying to build an esx rack server and need help with the hardware to get,i have a budget of $1200 to spend on it and i already have 2tB hdd .I was thinking about just buying a dell but the are expensive
This is also going to be for a home lab for now

could you guys help me pls

thanks

this is what i configured on dell for it:

467-4248Core 2 Duo E6305, 1.86GHz, 2MBCache, 1066MHz Front Side Bus for PowerEdge R3001311-8351512MB DDR2, 667MHz, 1x512MB Single Ranked DIMMs1320-6326Riser with 2 Slots: 2 PCI Exprx8 slots1341-688080GB 7.2K RPM Serial ATA 3Gbps3.5-in Cabled Hard Drive1420-6320No Operating System1430-2008On-Board Dual Gigabit Network Adapter1313-61168X DVD-ROM Drive, Internal SATA1313-6114Bezel1330-0309Chassis with Cabled Hard Driveand Non-Redundant Power Supplyfor PowerEdge R3001330-0312Electronic Documentation and OpenManage DVD Kit1341-688080GB 7.2K RPM Serial ATA 3Gbps3.5-in Cabled Hard Drive1341-6341Add-in SAS6iR RAID Controller (SATA/SAS Controller) which supports 2 Hard Drives - RAID 11341-3089No Rack Rails Included, 1U1310-8509Power Cord, NEMA 5-15P to C14,15 amp, wall plug, 10 feet / 3 meter

One dual core processor and only 512MB ram? I wouldn't even bother.

If this is for home, check with the Vmware compatibility guide and consider building yourself a whitebox. 512mb of RAM isn't going to cut it. You'll want aroudn 2GB at the BARE minimum. Although, you didn't really explain your goals with this server :D
 
One dual core processor and only 512MB ram? I wouldn't even bother.

If this is for home, check with the Vmware compatibility guide and consider building yourself a whitebox. 512mb of RAM isn't going to cut it. You'll want aroudn 2GB at the BARE minimum. Although, you didn't really explain your goals with this server :D

i already have 4gb ram and i'll be using it to run pbxinaflash,windows home server .redhat and server 2008 for now
 
i run WHS in vmware server and player and it works great with bridged network, i had some issues getting the mac address to work with a static lan ip... butother than that it was easy
 
Back
Top