Vista BSOD on install, help!

[Taipans]

I just put together a new sytem and got a BSOD on the Vista install. It pops up after the scolling Vista startup bar is finished. I am using Vista Ultimate 64-bit and the error code is as follows,

STOP: 0x0000007E (0xFFFFFFFFC0000005, 0xFFFFF8000985E251, 0xFFFFF98001ADA428, 0xFFFFF98001AD9E00)


I have no idea what error code that is and I am hoping someone knows so I dont have to tear down the entire system.

System Specs:

Seagate Barracuda ES ST3750640NS 750GB
EVGA 132-CK-NF78-A1 NForce 780i SLI
Intel Core 2 Quad Q6600 Kentsfield
Mushkin Extreme Performance 4GB (4 x 1GB) DDR2 1066
EVGA GeForce 8800GTX 768MB (x2 SLI)
VISTA ULTIMATE 64-bit

Thank you very much!

 

[DevilDoc]

Try it with a single stick of ram. That may be the culprit.

 

[BinarySynapse]

Well, 0x7E is a SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error. Could be faulty hardware, or just a general incompatibility.

http://msdn2.microsoft.com/en-gb/library/ms795746.aspx


EDIT: found this too
http://forums.nvidia.com/index.php?showtopic=49452&pid=300942&mode=threaded&show=&st=&#entry300942

 

[Taipans]

Wow I would of never guessed that. I was thinking it could be my SLI setup or something since I have installed Vista 64 with 4 gigs before. But this might be a much easier fix then I thought. I will give it a shot when I get home today, thank you very much!!!!!