VISTA 64 - RAID 0 - MSCHCKDSK Compatible?

DougWD

Limp Gawd
Joined
Sep 4, 2005
Messages
502
Rig in sig.

I had a complete melt down two days ago, and I'm trying to trouble shoot the problem.

I started Vista 64 and chkdsk wanted to run on boot, so I let it. It said it found errors and then proceeded to "replace invalid security IDs with default security IDs." Afterwords, the system wouldn't boot.

I couldn't get Acronis to reimage the array, so I deleted it and reconstructed it. After that, Acronis allowed me to restore it.

OK, so then I scheduled a chkdsk for reboot and something similar happened. I can't tell you what check disk did because I had the GUI on and it covers up the CD process. But I know it didn't do the security thing because that took about two hours. This last check took about 3 minutes, but with the same result--and unbootable system. It would boot to a point I had mouse control, but would give me a black screen, no CTRL-ALT-DEL nothing. Hard boot only way out.

The first time Vista blind sided me because I didn't schedule a check disk on restart, and on shutdown, I had no problems either. At this point I'm thinking one of two things: (1) check disk is incompatible with RAID 0 on Vista 64 SP2 or (2) Bad WD 640 Black. My next test is to delete the array, boot with an external drive, and run WD diagnostics on each disk--since you can't run a disk analysis tool (that I've found) when using RAID.

What do you all think?
 
Well I've always run chkdsk on my Raid 0 setups. I had a pair of first gen 36g raptors that I used for a very long time, on an nvidia controller, a silicon image controller, and an Intel ICH9R. In all 3 cases I had them in raid 0 and as my boot drive and ran chkdsk many times over the years.

Just curious, are you running a regular scan or a surface scan also?
 
I just choose to scan for errors and then checked both boxes fix system errors and bad sectors, and then it asks to reboot to start scanning. I've confirmed this happens three times now.

Before the last scan, non boot, and reimage, right at shut down I gott an error saying: Logon process has failed to create the security options dialog. Failure-Security options. And then OK is the only choice. After that I had to do a hard boot to shut down. I read where that error can correspond with a bad disk.

The first time it happened, as outlined above, I did not tell Vista to reboot and scan. It just did it automatically. I did a search and found this problem for XP and server 2003 / 2008 but nothing saying Vista. One of the techs said he called MS and they said there is no fix except to let the scan run in order to reset it. Either that or you can boot with another drive and edit the registry somehow. It got pretty exotic. The guy was an IT manager and said he actually did reset it and then checked all his security options and reset the scan, and that there was absolutely nothing wrong with his disks nor security indexes. I thought that may have happened to me, but now on a boot + scan I'm getting an incomplete boot--boots to Vista, black screen, mouse cursor only. Then I have to reimage.

Unless someone has a solution, the only thing I can do is tear my aray down, individually check the disks with the Western Digital tool, and see if one is bad. If both show ok, I have no idea. As you know this Gig board is CH10.
 
Last edited:
Back
Top