via to nforce2 problems

Joined
Jul 14, 2004
Messages
30
i just switched from a via chipset (soyo dragon ultra sy-kt400) to a nforce2 chipset (ECS N2U400-A) and when xp boots it just bluescreens (after a instant of the loading screen). my buddy told me it was because i didnt uninstall the via drivers first, though i've never had to do it switching chipsets before. anyways, i got to the recovery console and i'm not quite sure how to switch the drivers out. can anyone help?

i need an answer asap because i need to fix it today. so prove your leetness. :cool:
 
Or boot from the windows disk and do a repair install. This way you keep all your old settings, program installations, etc.

When i moved from an intel pIII 800mhz processor with an 820i chipset to a Barton 2500+ with an Nforce II chipset this helped me out alot. It works flawlessy.

Just make sure if you have any service pack that you use an Xp disk with sp1 integrated otherwise you might run into some problems.
 
what the problem is your IDE drivers when ever you switch from via to intel or vise versa and in your case via to nvidia xp is looking for the via ide controller and cant find it and BSOD's. The solution: change the IDE drivers to standard dual channel ide driver and the swap your stuff or just do a repair install of XP, with 2k you have to swap the driver before the swap b/c a repair will not fix it
 
Two options-

1. Repair Windo'hs

2. h4x0r teh registry:

Goto command prompt from bootdisk (that makes ntfs accessible, if needed)

1. Rename c:\windows\system32\config\system (no extension) to system.bak

2. Copy c:\windows\repair\system (the file) to c:\windows\system32\config

3. Reboot for profit.

Note: "windows" should be replaced with your windows directory (ususally windows or winnt);
The .bak rename is optional, only if you want to backup your hardware registry :D;
I just noticed, you can use steps 1 and 2 without the parens and word "to" and you have your DOS commands ready to go....
 
uh.. yea...

When swapping Mobo's, you pretty much HAVE to uninstall the current chipset drivers, and go to standard ones, if you plan on not reinstalling windows..

Personally, I'd never just swap a mobo.. to much shit to go wrong.. it's far better and easier to just backup, format, and reinstall..


You'll be thankful later, when you don't start having strange windows errors because parts of the old motherboad drivers are inteferrring with the old ones, even though you uninstalled them.. ;)
 
It's always best to do a reload, when chaging to different motherboard chipsets, in the long run you will be much better off...
 
Back
Top