Ok, so I'm finally doing the AMD64 plunge. Been a longtime Intel !!!!!!. I've always run Intel systems for myself, while my family/friends got the lower-end AMD solutions. ( typically due to cost constraints ).
I recently built a mid-to-low-end system for a friend using a Fry's 3000+ 64/ ECS NF3 combo. I noticed during the build process the damn thing booted/ran almost 2x as fast as my current rig. Mind you, I built my system 2 X-mas ago......
his:
AMD 64 3000+
ECS NF3-A ( 250 )
1GB Kingston value ram
120GB WD SATA
mine:
P4 3.0c
Abit IC-7 G
1GB Mushkin ( 2x256 level II, and 2x256 special 2-2-2 )
2x60GB Maxtor SATA Raid 0
I've been wanting to do some custom painting on my clearPC/Acrylic case, and knew I'd need some down-time to get that done. Being bitten by the speed demon/bug, I figure this is as good a time as any to upgrade.
So, all that being said I've been looking around and have come upon what I think will be a decent uprgade/setup. I only have 1 condition: I currently have a PNY 6800 AGP with all pipes opened 16x6. I really don't have the funds to buy a new mobo, CPU, memory, AND Vid card. As such, the vid card stays, and I'll need a mobo that's 939/AGP compliant. Future proof is also a desireability. ( is that a word? )
Afte some google'ing/research I came upon the the Asrock 939 Dual mobo.
Asrock 939 Dual SATA2
review on Anandtech
It's got the AGP compliancy, and future PCIe/CPU support. I'm not keeping any of my old hardware ( well, except for the 6800 ), so I've decided to also pick up some Crucial Ballistix memory.
link
Now here is the question.
I can't afford a X2. Don't see the need as I'm not a serious/hardcore gamer anyways. ( used to be, but don't have the time anymore. ) I was thinking about picking up a Venice core CPU ( 3200 or 3500 ), but noticed the San Diego's. Other than the L2 cahce size being bigger ( 1Mb as opposed to 512K ), is there enough of a difference between the CPU's to warrant buying a SD over a V? Also, I keep seeing V cores listed as both 800Mhz, and 1000Mhz FSB. Are there 2 differnet V Cores? ( I don't see that listed on AMD's CPU spec sheet )

I recently built a mid-to-low-end system for a friend using a Fry's 3000+ 64/ ECS NF3 combo. I noticed during the build process the damn thing booted/ran almost 2x as fast as my current rig. Mind you, I built my system 2 X-mas ago......
his:
AMD 64 3000+
ECS NF3-A ( 250 )
1GB Kingston value ram
120GB WD SATA
mine:
P4 3.0c
Abit IC-7 G
1GB Mushkin ( 2x256 level II, and 2x256 special 2-2-2 )
2x60GB Maxtor SATA Raid 0
I've been wanting to do some custom painting on my clearPC/Acrylic case, and knew I'd need some down-time to get that done. Being bitten by the speed demon/bug, I figure this is as good a time as any to upgrade.
So, all that being said I've been looking around and have come upon what I think will be a decent uprgade/setup. I only have 1 condition: I currently have a PNY 6800 AGP with all pipes opened 16x6. I really don't have the funds to buy a new mobo, CPU, memory, AND Vid card. As such, the vid card stays, and I'll need a mobo that's 939/AGP compliant. Future proof is also a desireability. ( is that a word? )
Afte some google'ing/research I came upon the the Asrock 939 Dual mobo.
Asrock 939 Dual SATA2
review on Anandtech
It's got the AGP compliancy, and future PCIe/CPU support. I'm not keeping any of my old hardware ( well, except for the 6800 ), so I've decided to also pick up some Crucial Ballistix memory.
link
Now here is the question.
I can't afford a X2. Don't see the need as I'm not a serious/hardcore gamer anyways. ( used to be, but don't have the time anymore. ) I was thinking about picking up a Venice core CPU ( 3200 or 3500 ), but noticed the San Diego's. Other than the L2 cahce size being bigger ( 1Mb as opposed to 512K ), is there enough of a difference between the CPU's to warrant buying a SD over a V? Also, I keep seeing V cores listed as both 800Mhz, and 1000Mhz FSB. Are there 2 differnet V Cores? ( I don't see that listed on AMD's CPU spec sheet )