Venice A64: HTT--the higher, the better?

SKYY

2[H]4U
Joined
Feb 10, 2002
Messages
3,062
What the title says. I'm able to post at 350, but it won't load windows. 300 works fine, without a voltage bump. I'm trying to find a happy medium between the two, but I'm wondering if it's worth my effort.

Also, my RAM won't hit anything over 211, with CAS 2 and all other timings stock.

Any input is appreciated!
 
The combination that yields the highest CPU speed with the best memory timing/frequency tradeoff is the best HTT. Running HTT at 300X6 = 1800 with a 2/3 divider to give standard 200MHz memory and a X3 HTT multiplier isn't going to be much different than doing nothing at all on a Venice 3000+ which is 200X9, 1/1 divider, and 200X5 at stock (I believe).

In short, your question cannot be directly answered with the given information.
 
I know that the HTT frequency doesn't matter (HTT bus x HTT multi, usually closest to 1000 is best). However, if you are asking whether or not 300mhz x 9 = 2.7ghz is faster than 200mhz x 13.5 = 2.7ghz, I feel only benchmarking can tell, as in the past running a higher cpu bus (even if everything else stayed the same) did result in better performance, though this was in the sub 200mhz bus days.
 
Back
Top