• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

UV Paint?

A

apex32

2[H]4U
Joined
Jul 19, 2005
Messages
2,618
Can i use UV Paint on metal inside my case? what about on my widnow with a stencil or something.



link

+ is that stuff any good or is there better stuff or is there cheaper?
 
yeah you can, I don't know that you'd want to put it on the window, like the link says it comes off with water, try it on a small piece of the window and make sure it doesn't stain first maybe? but the metal would be aok
 
Lots of people use that stuff on their case windows. It's a bit tough to make it go on evenly, without the "orange peel" effect. Just make sure you spray it in a warm room, and lay it perfectly flat, as the stuff's runnier than regular paint... I used this to write stuff on my wall in my university dorm room, looked awesome under UV, and washed right off :). Here's a tip... Spray it on the inside of your window, as no water should ever be *free* around the inside of your box.

On a side note, it's fairly clear... but there's a bit of yellow if you use a really thick layer. Spray it on in *light* coats, and check with a UV light each time it's dry.
 
You must log in or register to reply here.
Back
Top