• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Using RAID Controller to Connect Individual Drive?

T

thehum

Weaksauce
Joined
Jul 8, 2006
Messages
74
So here's what I'm trying to do: Recover data off a broken RAID-0 Array on a Dell Poweredge server I have with a SCSI PERC 4/SC RAID controller

Here's how I'm going about doing that:
Using RAID Reconstructor to build three images, one of each three 80gb HD that was configured as one logical 200gb drive. Then, de-stripe the images into one image using RR and using GetDataBack to see what I can recover.

Pretty Straightforward.

But first I need to take images of the individual drives. Do I need a separate non-RAID SCSI controller to do that or is there a way I can just connect each drive individually so RAID reconstructor recognizes them as individual drives?

Thanks in advance.
 
You must log in or register to reply here.
Back
Top