Using old PCI IDE card

davision

Weaksauce
Joined
Mar 7, 2003
Messages
83
I have an old PCI card (probably at least 5 years old) which has an IDE interface on it. I'd like to use this on a relatively recent computer so I can add another hard drive. The computer has an AMD 4200+ Gigabyte motherboard, the GA-K8U-939 (specs here... http://www.giga-byte.com.tw/Product...erboard&ProductID=1914&ProductName=GA-K8U-939)

It has 5 PCI slots (2.2 compliant)... but I don't really know what this means. I don't really expansion cards and I'm unfamiliar with all the new PCI-X and PCI-Xpress and all the other flavors of PCI that exist these days. I just need to know if the newer PCI slots are backward compatible with this dinosaur PCI card that I have.

Can anyone explain what is safe and not safe to use in the modern motherboards?

Thanks.
 
I had that board (replacement for a more expensive aBIT board that bit the dust on me) in my last machine. PCI is PCI is PCI. They're all backward compatible, so it doesn't matter what revision of the PCI standard your IDE controller card was designed for as long as you have PCI slots (which you have plenty of on that board).

Newer board normally have a mixture of PCIe (PCI-express) and standard PCI slots, normally more PCIe slots than PCI. PCIe is the newer standard, allows for more bandwidth, etc. PCI-X is more or less unheard of outside of use in servers.
 
Thanks for the info. Just out of curiosity -- are PCIe slots backward compatible with regular PCI cards?
 
PCI-E is a whole new interface. Don't try to put an old PCI card in a PCI-E slot. Your IDE controller card will work just fine in the regular PCI slots, no matter how old it is.

That being said, if it's really old it might be a really slow controller.
 
I don't think drivers for an IDE controller would be a problem in XP or Vista, but you never know.
 
Back
Top