Using a Peltier device to cool a hard drive

dpearcepng

n00b
Joined
Dec 11, 2006
Messages
2
I see a lot of hard drives a month that are failing. Some of them work for a while if I can cool them down a bit.

I've though about using a Peltier junction but I don't want to freeze the drive, just cool it down to about 60 degrees. To regulate a peltier, can I just use a thermal switch or does it require something more?

Thanks.
 
Watercooling is overkill, let alone a peltier...

Sure, you could do it... Get like, a 20w peltier and affix it to a large copper plate, which contacts the main chips on the PCB.

Should be enough to cool the main heat components.
 
cooling for a hard drive in general in a well ventilated case is redundant...why would you want to use peltier on it?

If hard drives are failing on you every few months, maybe you need to re-asses the cooling for your case, not just your hard drives.
 
I guess I need to be a little more informational. ;)

I work in a repair shop and failed hard drives are a fact of life, usually from people with no current backup. In an effort to help them, I try to recover what I can of their data. By gently cooling the drives, I can usually get them to work long enough to get a copy of their data. I'd like to pull their drive, hook it to a test computer and keep the drive cooler than room temperature while I am copying data off of it.

So this is not a "how do I keep my drive cool in a hot case" question or "Why do my drives keep failing" question.

This is a "how do I regulate the temperature of a peltier" question.

Thanks! :D
 
o, lol, that makes sense then i guess. Well, I suppose you COULD, but personally i think water would be better cheaper and better, or just getting a small AC unit and sitting it on the vent of the AC unit...condensation is a bitch, but for just long enough to backup data it should be ok...
 
Well, to do that, I ALSO use a peltier! That's funny!

I attached 2 80w peltiers to a...

This

And run the drive in it. Totally sealed off, theres no condensation on the drive (ices the inside of the enclosure), but the drive gets to like -10 in about 20 minutes.
 
Back
Top