USB Speakers stop screensaver

Raptor_007

Limp Gawd
Joined
Sep 6, 2006
Messages
373
I have a customer who is dead set on getting his screensaver to load. Whenever he has his USB speakers plugged in, it will not load. If he pulls out the USB speaker connection, then it will load. I instructed him to make sure that for each instance of USB Root Hub in device manager that the "Allow computer to turn off this device to save power" option was checked in the properties and power management tab. This did not solve the problem.

I tried searching the web and forums here, but didn't find anything seemingly useful. If anyone has any ideas for me, I'd really appreciate. Like I said, he wants his screensaver to come on, and he wants to keep the speakers plugged in. I hope someone has some information that can help me solve this issue. It's probably something really simple! :p

Thank you.
 
I have never seen that happen and am interested in the answer.Might be a bad usb,maybe something is set or plugged wrong on the board phisical not software?Tried hooking to different port?It would be really hard for me to say withot it being here.Sry if no help.
 
I'm guessing those USB speakers add 3 or 4 items in the device manager. Check each one of those items for "Allow this device to bring the computer out of standby" and uncheck it..

Riley
 
I'm guessing those USB speakers add 3 or 4 items in the device manager. Check each one of those items for "Allow this device to bring the computer out of standby" and uncheck it..

Riley

I'll have to give that a shot. He's the father-in-law of a friend of mine, and I don't live very close to him. I'll get him to email me a printscreen of his device manager items. If anyone else has any other ideas, I'd appreciate it.

Thank you for your input.
 
Back
Top