• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

!!urgent Help Needed!! Please!!!

K

Kaiga

Gawd
Joined
Feb 2, 2005
Messages
827
ok, guys this is going to sound dumb to you, but tjere is an e-machine I'm working on and I decided to try and oc it, I raised the FSB from 166 to 200 and now when I turn the PC on, the keyboard lights come on, the ethernet lights light up, and all the fans run, the drives run, but there is no video, I tried to pull the jumper out right near the ROM BIOS chip there and left it out. and it won't reset. and video won't come back on. guys help me please is there something else I need to do? I didn't even adjust anything but the FSB setting. am I supposed to do something like turn the jumper around or what? and I hope I did not fry my CPU, everything else runs fine, please help me!! Am I supposed to put the jumper back in, reverse it? or what? help!
 
overclocking an e-machine? What where you thinking?

the cmos jumper (or rom bios jumper) has 3 pins? if yes then remove it from the current position and put it next to it:



step 1

[ ] jumper
| | | pins
------ mobo

step 2

..[ ] jumper
| | | pins
------ mobo


wait 30 sec and go back to step 1, then reboot
​
 
if its 2 pins then put it in the two pins, wait 30 sec then put it back to its original location and reboot
 
nvm, thanks though guys, fixed it, I just went ahead and pulled the battery. thanx for the courtesy. thanks.
 
You must log in or register to reply here.
Back
Top