My speakers (Logitech z-5500) pop occasionally when another device in the room turns on/off. Not all the time, but enough to be annoying. Would a Line Interactive UPS with pure Sine Wave output be more suitable to fix this, or should I go with a home theater power conditioner?
These speakers are 500 watts RMS, and 1000 watts peak, so putting these on a UPS along with my PC and whatever else I plug in there would require a pretty hefty UPS.
I've used one of the calculators in the sticky and it said for _only_ the 450W PSU I have and the 500W Speakers plugged into the UPS, I would need at minimum 1300ish VA UPS, recommended was around 1600-1700VA. That's not including anything else I'd plug into it.
I'd be thankful for any insight on this.
These speakers are 500 watts RMS, and 1000 watts peak, so putting these on a UPS along with my PC and whatever else I plug in there would require a pretty hefty UPS.
I've used one of the calculators in the sticky and it said for _only_ the 450W PSU I have and the 500W Speakers plugged into the UPS, I would need at minimum 1300ish VA UPS, recommended was around 1600-1700VA. That's not including anything else I'd plug into it.
I'd be thankful for any insight on this.