Upgrading, need PRO advice

HK-Viper1-

n00b
Joined
Jul 8, 2006
Messages
49
Hello everyone,

I would like to start by thanking all who can provide me with some professional help.


I am upgrading my current rig that is in my sig to the following components that I already have ordered and received finally. I do not have any problems on installation of components. I usually install, then have a friend program. That is were it gets tricky for me when or what to do next after powering up and so forth. Basically looking for a step by step process on what to do. Here is what I have in boxes waitng to upgrade. The rest is going to stay in the case.

Asus Striker - 680i
E6600
Corsair Dominator XMS2-8888 1111MHz 4-4-4-12 2GB
BFG 8800gtx - only 1 for now

1. What do I do before dismantling my current rig? So that I am be ready for new install.

For example; do I need to do a backup, delete any regestrey keys from the HD's? etc.

I plan on doing this on the weekend but I want to be sure what I am doing.

Again, I Thank you all for any professional help that you can provide.
 
I ain't pro, but here gos... assuming a windows box...

0) Download an AV program with most recent definition file(s)... save to USB stick or data drive/partition
1) Backup any data on the OS partition, if you only plan on clearing the OS partition
2) Uninstall old components/Clean out any dust
3) Test new components outside of case
4) Tweak any settings needed (make sure BIOS settings are correct)
5) Install new compnents into case
6) Boot into Windows Setup, pressing F6 if needed, and inserting the Floppy if required
7) Delete the old OS partition
8) Create a new OS partition
9) Install windows onto the new OS partition, and format using NTFS
10) Install any service packs needed (that weren't slipstreamed into windows disc)
11) Install drivers
12) Install AV program
13) Install other programs/games
14) Hookup to network
15) Download any updates needed (for both windows and programs/games)

I probably forgot some things, but I'm sure other people will correct me or fill in anything I missed. If you need more detail for a certain step, just ask.
 
I ain't pro, but here gos... assuming a windows box...

0) Download an AV program with most recent definition file(s)... save to USB stick or data drive/partition
1) Backup any data on the OS partition, if you only plan on clearing the OS partition
2) Uninstall old components/Clean out any dust
3) Test new components outside of case
4) Tweak any settings needed (make sure BIOS settings are correct)
5) Install new compnents into case
6) Boot into Windows Setup, pressing F6 if needed, and inserting the Floppy if required
7) Delete the old OS partition
8) Create a new OS partition
9) Install windows onto the new OS partition, and format using NTFS
10) Install any service packs needed (that weren't slipstreamed into windows disc)
11) Install drivers
12) Install AV program
13) Install other programs/games
14) Hookup to network
15) Download any updates needed (for both windows and programs/games)

I probably forgot some things, but I'm sure other people will correct me or fill in anything I missed. If you need more detail for a certain step, just ask.

why is everyone so anal about AVing and friewalling before connecting to the net? :p there nothing wrong with it of course, but ive NEVER had any trouble... DL the latest version of whatever AV i decide to go with on the particular build, and firewall after DLing firefox... :p
 
Thank you enginurd & 0mega,

For the quick response. It is highly appreciated.

I should have mentioned that I have not only a (C: but a (D: as well.

0) AV program and all other data on my (C: can I copy it to my (D: without reformatting it on this syst and how.
1) When and how do I set both my raptors in raid 0 and my other 2 HD in raid 0 keeping in mind that (C: will be OS & some data for quicker boot & (D: is strictly for data.
 
why is everyone so anal about AVing and friewalling before connecting to the net? :p there nothing wrong with it of course, but ive NEVER had any trouble... DL the latest version of whatever AV i decide to go with on the particular build, and firewall after DLing firefox... :p

i don't do the AV thing immediately... but i never put a fresh install directly on the internet. always behind a suitable router. i usually leave windows firewall enabled in most cases. a good router will stop all the transient virii out there that can get a machine before you can get it protected.
 
why is everyone so anal about AVing and friewalling before connecting to the net? :p there nothing wrong with it of course, but ive NEVER had any trouble... DL the latest version of whatever AV i decide to go with on the particular build, and firewall after DLing firefox... :p

Because without SP2 for XP, you're vulnerable from the time windows installs the networking components, before it has even finished the entire windows installation. Viruses (RPC exploits) are still around... and while you havent been affected by them, that doesnt mean others will have the same luck as you. I, myself, have never been affected by such a virus (knocks on wood), but that doesnt stop me from giving good advice.

@OP: But hey, if you'd like to try your luck, go ahead... I just think its worth the extra 30 seconds to DL it to a usb key beforehand, lol. However, if you have SP2 slipstreamed into your windows install, then you're not as vulnerable.

Also, sometimes, you're not always behind a router/firewall (eg. dorms; while you are protected from the outside, you're not protected from infected systems on the inside, hehe).
 
Because without SP2 for XP, you're vulnerable from the time windows installs the networking components, before it has even finished the entire windows installation. Viruses (RPC exploits) are still around... and while you havent been affected by them, that doesnt mean others will have the same luck as you. I, myself, have never been affected by such a virus (knocks on wood), but that doesnt stop me from giving good advice.

@OP: But hey, if you'd like to try your luck, go ahead... I just think its worth the extra 30 seconds to DL it to a usb key beforehand, lol. However, if you have SP2 slipstreamed into your windows install, then you're not as vulnerable.

Also, sometimes, you're not always behind a router/firewall (eg. dorms; while you are protected from the outside, you're not protected from infected systems on the inside, hehe).

only if youre computer uses network devices that have drivers included with windows :p and my IP is based on my MAC address i believe, so every time i install the drivers, its different... so i dont worry about it :p
 
Honestly, I've never had a virus on my own system, and there were times that I've been as careless as you. However, I'm not gonna go around telling people they'll be fine when I know for a fact that there is a vulnerability. And again, not everybody is in the same situation as you, so why not give solid advice instead of griping about good advice being given?
 
However, I'm not gonna go around telling people they'll be fine when I know for a fact that there is a vulnerability.

Only once did I install an OS on a machine connected to the Internet w/o a firewall router. It had a virus in one of the core Windows exes by the time the install was finished. The AV program I then installed was unable to remove it and I had to reformat and reinstall from scratch (unplugging the NIC this time).

If you look at the log file for a firewall router, you'll see that there are attempts to access all sorts of TCP ports (all in the higher numbered - ie. application defined - range). My firewall only lets in TCP 25, 80 and 110 and I get lots of attempts to do stuff from everywhere (mostly Asia) in my Apache logs and mail server logs. If the virus/worm/etc attacks are half as frequent as all these, there's a good chance you'll get hit during an install.
 
Thank you enginurd & 0mega,

For the quick response. It is highly appreciated.

I should have mentioned that I have not only a (C: but a (D: as well.

0) AV program and all other data on my (C: can I copy it to my (D: without reformatting it on this syst and how.
1) When and how do I set both my raptors in raid 0 and my other 2 HD in raid 0 keeping in mind that (C: will be OS & some data for quicker boot & (D: is strictly for data.

Hey you all. I really do agree that when there is a vulnerability that you should use an AV, But, can we get back to the subject please. I do not mean to come off as a sore thumb but I am looking for some help. I am sorry & again Thank You!!!
 
Yes, just dont delete the 2nd partition in windows setup.

Uhm... what is your current HDD configuration? How many drives do you have total and what are they?

Its also not a good idea to have your data "drive" be a raid0 array.
 
How do I copy the data over to (D:?

(C: 2 WD raptors 74gb 10,000 rpm 16mb cache serial ata150 OEM striped in raid0
(D: 2 WD caviar se 200 gb 7200 rpm 8mb cache sata 3.0 OEM striped in raid0

Total of 4 drives.

PS

Should windows be deleted before backing up? What drivers if there are any should be deleted before backing up?
 
How do I copy the data over to (D:?

(C: 2 WD raptors 74gb 10,000 rpm 16mb cache serial ata150 OEM striped in raid0
(D: 2 WD caviar se 200 gb 7200 rpm 8mb cache sata 3.0 OEM striped in raid0

Total of 4 drives.

PS

Should windows be deleted before backing up? What drivers if there are any should be deleted before backing up?
I have read of issues with drivers that freak the OS out when reinstalling.
 
OK,
I am stuck in the OS installation. I deleted the C: partition and not the D: and when I am going to start a new partition I get

70905 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]
Unpartitioned space 70904 MB

70905 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]
Unpartitioned space 70904 MB

190780 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]
C: Partition1 [Unknown] 190772 MB < 190771 MB free >
Unpartioned space 8 MB

190780 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]

D: Partion1 [Unknown] 381559 MB < 381559 MB free >


My Hdd configuration was 2 10,000 rpm 74gb rapator in raid0 which I think would be C:
& my 2 200gb 7200 rpm Hdd in raid0 which I guess is D:

All the above partions is after I deleted C: and then tried to create new partion as you see now. But, When I select the C: Partion1 to install XP I get this;

To install Windows XP on the partion you selected, Setup must write some start up files to the following disk:

70905 MB Disk 0 at Id 0 on bus 0 on atapi [MBR]

However, this disk does not contain a Window XP - compatible partion. To continue installing Windows XP, return to thr partion selection screen and create a Windows XP-compatible partition on the disk above. If there is no free space on the disk, delete an existing partition, and then create a new one.

So what do I do? I do not want to delete another partion that might have all the data I backed up on. I do not know how to configure the drives so that they are in raid0.

PLEASE HELP...
 
When you're at the screen that shows the list of hard drives choose create a partition in unpartitioned space for your hd0. Format it as ntfs (not quick). At the moment it's unformatted and therefore windows cannot be installed.
 
When you're at the screen that shows the list of hard drives choose create a partition in unpartitioned space for your hd0. Format it as ntfs (not quick). At the moment it's unformatted and therefore windows cannot be installed.

I have tried this but when I do then I see a G: partition. does that mean there would be in My Computer a C:, D: and G: drive? I only want to see it the way it was C: & D: and configured in Raid0. I do not know how to configure them in Raid0 as i mentioned above.
 
Back
Top