Upgrade time again

vector2005

n00b
Joined
Feb 27, 2006
Messages
27
Got some good information a year ago when I went to upgrade, figure I would try again.

I'll be doing the upgrade in 2 phases the first will be for the mb, ram, and cpu. The 2nd phase will be for the video card and other items. The machine will be used mainly for gaming, but with some photo/video editing also. I'd like to try to stay around $600 if possible.

Heres what i'm looking at so far (prices were current at the time of posting.)

Intel C2D E6300 $185
GSKILL 2GB (2x1GB) $189
Gigabyte GA_965P-DS3 $132

total is ~$510 before shipping so there is a little room to make some changes.

Any suggestions on different components? I normally run games at 1920x1200. I'm considering sli but haven't seen anything that will push me one way or the other. So i ask t the resolution i run should i maybe look towards going SLI? I used the newegg links as thats where i have ordered from in the past any other vendor recommendations is also welcome.

For this first phase i'll be taking the hd , dvd burner, power supply (antec smartpower 420), case (Thermal Take Tsunami) and video card (evga 7800gt) from the current system. As mentioned before the 2nd phase will be mainly for the video card and possibly some of the other components, but thats down the road until after other dx10 cards are out.

Thanks for the advice in advance
 
Looks ok. You'll probably need a new PSU in your phase 2. If you plan on OC'ing, you'll need a better HSF than the stock one to reach past 2.8/3Ghz. Also, if you want to run higher than 3Ghz, you'll need some ram that can OC higher than 450Mhz. Consider the Patriot LLK sticks or Buffalo Firestix.

$190 - Buffalo Firestix 2GB (2x1GB) DDR2-800 FSX800D2C-K2G
$190 - Patriot eXtreme Performance 2GB (2x1GB) DDR2-800 PDC22G6400LLK ($255 - $50MIR)

Wow, those are cheaper than I thought they would be. It makes me wonder if they still use Micron ICs. :eek: Maybe someone else can shed some light on this.

$40 - Scythe SCNJ-1100P 120mm CPU HSF
 
Thanks for the info on the memory. Had pretty much randomly picked from the under 200 listing with a company i had used in the past. I hadn't really been keeping up with the different models/manufactures of memory. I do plan to overclock, just not sure how far yet.

I assumed that the psu would need to be updated when I puchased a new video card.

The Scythe hsf looks like it has an interesting mounting bracket for the fan, just wonder how much vibration that allows between the fan and the heat sink.

After looking through the memory forum i found several posts that were recommending the poster to switch from the e6300 to the e6400. so that something else i'm considering.
 
Yah, phase 2 is when you plan on uprgading your vidcard, so thats why I mentioned the PSU for phase 2.

The higher multiplier on the E6400 certainly helps in OC'ing. Most ram, unless they're using micron ic's, will reach around 450 if you're lucky. And 7 * 450 = 3.15Ghz. But 8 * 450 = 3.6Ghz :D Here's the ramlist: http://ramlist.ath.cx/ddr2/

There isn't much vibration at all between the fan and hs on the ninja, since the fan is low RPM and pretty quiet.
 
thanks for the info and site.

So at this point here is the updated list

Intel C2D 6400 $220
Patriot eXtreme Performance 2GB (2x1GB) DDR2-800 (LLK) $239 (before a 50 rebate)
Gigabyte DS3 $132
Scythe SCNJ-1100P 120mm CPU HSF $40

for ~$640 before the rebate and shipping. Which in the end still puts me close to the original $600 budget.

I have 2 questions, one existing and another new. The existing question is since I game at 1920x1200 would it be to my advantage to look at sli or crossfire? I realize this would mean swapping out the mb.

The second question is what is the recommended thermal compound these days, is it still the artic silver or is there something better now?.
 
For 1920x1200 gaming w/ high settings, yes, you should definately look into sli/crossfire. sli on the cheap would mean a P5N-E SLI, and the extreme would be the P5N32-E SLI or eVGA 680i -AR board.

Yes, as5 is still the popular choice. Oh, and I meant to say that if you wanted to reach higher than 3Ghz, you should get a better HSF, hehe. Other choices would be the Tuniq Tower, Zalman 9500/9700, Ultra120, etc. Heh, I meant to address these things in my previous post, but I was distracted by the low prices of the RAM (So I never quite finished that post, hehe). Though, now it seems those were Pres. day specials, lol, since the Patriot has a rebate again.
 
Looks like its time to hit the boards/sites again and do some research on the HSF. The last one I bought was the coolermaster aero7 for an athlon xp, I used the stock hsf with the athlon 64 I'm currently running, so I've got some catching up to do.

the p5n-sli is the same cost as the ds3 i had linked before, but it brings up some questions. How much difference is there between the 650 and 680 chipsets. Also whats the performance difference/advantage for sli between running the pci-e in x8 mode (p5ne-sli) vs both slots running at x16 (evga and a5n32e-sli).

Again, thanks for the information, it has helped. I'm probably not going to get anything ordered until some time towards the end of next week.
 
I don't know enough about SLI to give you a fully detailed answer. In short, my opinion is that there really isnt much performance gain between the two, and would only be noticed on extreme resolutions (30"). Now, my knowledge of this is pretty dated. I looked into this issue back when I was building my current system, which was a couple years ago, on the s939 nF4 platform. So, things might have changed since then, hehe. This question is better suited for the Vidcard subforum.
 
That was pretty much the same impression I was under a year ago when I built my current machine. I had opted not to go the sli route at that time, and am still somewhat undecided on it again now. I'll move the last set of questions to the vid card forum, and thanks for all the help.
 
Back
Top