Ungrounding problem please HELP!!!

I

insulin

n00b
Joined
Feb 18, 2004
Messages
16
I just put in the shitty ECS ELITEGROUP mobo and i cant get it ungrounded. I put it on cardboard and it beeped out of the case (with nothing on the board except processor) and once i put it back in the case NOTHING please help.
 
ya i know, outside the case it does but when i put in back in the case (still with nothing on it but processor it doesnt do anything not even beep).
 
i have the same problem, my mobo works outside of the case but when i put it inside nothing happens. Any help would be appreciated, this is starting to get frustrating!
 
Check to make sure one of the motherboard standoffs isn't aligning with a hole. Or, the motherboard standoff doesn't have a hole on the motherboard and is grounding out...
 
The biggest problem with shorting out a mobo in the case is using larger than usual screws on the standoffs and touching a trace with the screwhead. I got in the habit of using insulated washers on both sides to eliminate that possibility. :)
 
The supports or legs that keep it off of the mobo tray or the right side of the comp case.
 
You must log in or register to reply here.
Back
Top