Uh oh... Copper exposed

//[T.0.P]//

Limp Gawd
Joined
Mar 20, 2006
Messages
246
I was trying to remove some hook thingies that clamp things like the chipset heatsinks from the back of my motherboard(Only way to get em out) and scratched it up a little bit. Some copper is showing... Read another thread about scratches on the mobo and read:

"If there is no copper showing, you should be fine"...

So, am I screwed?
 
If you insist, but I can't get any pictures. No digicam :(

- A8N32-Sli Deluxe
- AMD FX-57
- 2GB DDR400
- 2x 7900GTX SLI
- OCZ GamerXtreme 850 Watt(I think..)
- Windows XP SP3

There are scratches which are white, and them some others that are cleary bronze and shiny. The scratches aren't that huge, about .1mm to .3mm in length
 
Still isn't enough information. Did you scratch the actual motherboard as in deep enough to show traces, or did you scratch the chipsets, or what?
 
I scratched the back of the motherboard and some of the scratches is exposing copper.. I don't see any kind of tracing in the copper though.
 
//[T.0.P]//;1034217265 said:
I scratched the back of the motherboard and some of the scratches is exposing copper.. I don't see any kind of tracing in the copper though.

If you scratched the motherboard's PCB itself that deeply you are most likely screwed. Personally i wouldn't even connect anything and "test" it. As that might fry something. Can you show us on a picture where you scratched it? I tried to find a picture of the back of the mobo but google isn't helping.
 
I can get a picture, but it will be a while.. most likely til tomorrow. I'll post a picture as soon as I can.
 
Unless you broke any traces or short-circuited something, you should be fine, even if some copper is showing. If you didn't do either of those things and you're worried about accidentally causing damage, just get some electrical tape and cover up the exposed parts.
 
Unless you broke any traces or short-circuited something, you should be fine, even if some copper is showing. If you didn't do either of those things and you're worried about accidentally causing damage, just get some electrical tape and cover up the exposed parts.

Was thinking about electrical tape... Not a bad idea!

Well, here's some screen shots: ... Hopefully I didn't break any traces!!!!

White Scratches:
scratchwhite1.jpg


Copper Scratches:
scratchcopper1.jpg

scratchcopper2.jpg
 
man just try it, that doesn't look that bad, or better yet I'll buy it off ya for $5 and pay for shipping

LoL! Well, let me "test" it to see if it's "100%" working 1st ;)

Actually, I need this mobo pretty bad. It's my main mobo now, and will be my main single core sub system for time to come. If it poops, god may have mercy on me.
 
Doesn't seem bad. You can cover it with a light layer of something non-conductive like mhmm... epoxy?
 
Whew. That's a relief... for now :)

Alright then. Electrical tape, epoxy or super glue. Epoxy sounds pretty neat, but Electrical tape sounds the easiest to apply. Well, I'd figured epoxy would take some time to dry.

Thanks for the tips!
 
There are some quick drying epoxy (about 15mins).

But yea super glue would be an easier option.

Electrical tape would be the easiest.
 
Unless the flash discolored the PCB a lot, it looks you missed the traces, and just scraped ground plane - cover it with a piece of electrical tape and fire 'er up - should be fine.
 
Unless the flash discolored the PCB a lot, it looks you missed the traces, and just scraped ground plane

The back isn't so green as the flash makes it, actually. The color is more aqua. More like the last screen shot.
 
Back
Top