I have this card and have 2x WD75000AAKS drives attached to it. I recently got this card and hooked the 750gb drives to it.
The problem?
During boot the Raid screen appears and detects one 750 gives the model number and then just sits there with a blinking dot. Hit the power button computer shuts off instantly.
Ive tried all combinations of the two drives possible, moved the card to different PCI slots and still the same problem.
Even tried forcing it into SATA I spec as per WDs FAQ.
Hook up smaller drives, WD5000AAKS and an old WD 250GB drive, and boots no problems.
Im stumped, any suggestions?
The problem?
During boot the Raid screen appears and detects one 750 gives the model number and then just sits there with a blinking dot. Hit the power button computer shuts off instantly.
Ive tried all combinations of the two drives possible, moved the card to different PCI slots and still the same problem.
Even tried forcing it into SATA I spec as per WDs FAQ.
Hook up smaller drives, WD5000AAKS and an old WD 250GB drive, and boots no problems.
Im stumped, any suggestions?