• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

two pumps questions

M

mateo

Limp Gawd
Joined
Jun 3, 2005
Messages
140
I was wonder what you guys thought would be better for flow:

pump > 360 rad > 360 rad > another pump > gpu

or using the EK dual pump modification and do:

pump + pump > 360 rad > 360 rad

or do you think just one pump would be sufficient
for a loop with res/two 360 rads/1 gpu block/cpu/northbridge block

the pumps are Swiftech MCR320-QP

thanks for any advice
 
what pump/s are you using again? the part number you listed is for a radiator.

In most cases, one pump should be fine, I have the stackable radiator 2x 320's setup from swiftech running through 2x ek vid blocks going though a mcp355 with a xspc res top without any problems.
 
sorry pump is a the mcp355 as well and it will be running through the switftech stackable rads too. So you dont have a problem with flow? do you have a res?
 
no problems with flow at all, I use the xspc res top in leiu of a seperate res, it improves performance of the pump as an added bonus as well.
 
One pump should suffice. Having too is a nice fail safe though. I have seen threads where a pump will fail and block tops will actually melt. Sounds like you've got a nice setup there, though.
 
You must log in or register to reply here.
Back
Top