TWC Modem Swap

wizdum

[H]ard|Gawd
Joined
Sep 22, 2010
Messages
1,943
I figured i'd ask here before wasting more time with TWC tech support.

I bought my own modem (a Zoom 5341) to replace the one that TWC was "leasing" to me. I called them up and they said they added the MAC address of the new modem to my account. When I plug in the new modem, the upstream and downstream channels are locked, then it gets an IP address (which is the same one as my old modem). Everything looks good, but I have no access to the internet. Can't ping any external IP addresses or servers.

Is there something I should check on my end first, before I assume that TWC messed up the modem swap?
 
Are you pinging from your router, or from a host device on your network? In addition, this could be an ISP related issue, possibly with ARP. You're probably going to need to Tshoot with them. :(
 
Are you pinging from your router, or from a host device on your network? In addition, this could be an ISP related issue, possibly with ARP. You're probably going to need to Tshoot with them. :(

I tried both. I'm using a Ubiquiti ERL as my router.
 
I had a similar issue, but it was on my end. ERL works like a champ, except when the modem loses power. I power everything off, then power up the modem, then ERL and it usually does the trick. I had a power strip that would act funny. It's been replaced.
 
Back
Top