turn a db9 null modem cable to straight through?

Typically pins 2 and 3 are the transmit / receive on a DB9 (actually DE9) RS-232 serial cable.

The following connections are required:

Pin 2 (transmit) on end "A" to pin 3 (receive) on end "B"

Pin 3 (receive) on end "A" to pin 2 (transmit) on end "B"

Pin 5 (ground) on end "A" to pin 5 (ground) on end "B"

The following may or may not be required:

Pin 7 (request to send) on end "A" to pin 8 (clear to send) on end "B"

Pin 8 (clear to send) on end "A" to pin 7 (request to send) on end "B"

Many times pins 7 and 8 are connected together on each shell end instead.
 
Back
Top