• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Tuniq Tower Owners

I personally tightened them until only a couple threads were visible above the motherboard. Been trying to relocate a googled picture demonstrating it but had no luck.

Most importantly, tighten them all at the same time and do not get into a position where you need to untighten them - the springs restrict the counterclockwise motion and flake off their coating

Hopefully, you'll have room for your side fan (if you have one) when you're all done - the cooler is insanely large.
 
we tightened mine until it was "snug" and then checked the processor temps. We moved it around a little to see if it would get cooler with any side tighter, but it was actually all good.
 
You must log in or register to reply here.
Back
Top