Troubleshootin', need opinions.

jasongst

n00b
Joined
Aug 10, 2003
Messages
22
I have a middle-aged system with stability issues. This has been an on-going thing. I'm running a KT7-RAID (not A) with a Duron 700, Win98. When I get a game going it's usually fine, but when I try to play videos (or sometimes if I just click around in the OS too much) it tends to BSOD or cause graphic glitches. So it's weird: games: fine, 2D: flaky.

I stripped the cards out and ran with just my GeForce and just one DIMM with the case off. When it was still flaky I tried my other DIMM. Still no luck. I've got pretty recent video card drivers. I updated the BIOS on my board: no luck. I went to the BIOS and reset everything to the failsafe defaults; this seemed to help for a bit but soon it was back to its old unstable self. I even upgraded from a 250w PS to a 400w. Temps read fine, and I'm out of *affordable* ideas.

I guess what I want to know is: do you think it's the motherboard? That's my suspicion. I'm wanting to just upgrade my CPU a bit for about $60, but if I can't trust the stability of the sucker I'm just going to replace the motherboard and RAM along with it.
 
could be your ram, either not having enough or a failing module.

can you post full specs of your machine?

btw, im hoping you're not expecting to run "big" games with just a duron 700. i used to have KT7 + Duron 700 and it wasnt that great of a gamer box.
 
Both DIMMs are PC100 and were purchased at different times. I've tried each one of them seperately with the same results, so the odds of BOTH of them being bad seem pretty slim.

I've had this Duron box for quite a while. It's been great for Quake 3 and Counterstrike, but I'm getting back into PC gaming after a break and I know I'm going to need some more horses under the hood (Battlefield 1942 needs a bit of a boost). I've read you can run an Athlon XP 2100+ on my board although it'll have to be at 100mhz FSB, which is fine with me. It's a cheap processor.
 
Back
Top