Trouble with OS and IDE

im apirate

Limp Gawd
Joined
Apr 3, 2005
Messages
138
When I plug in my CD rom drives and HDD it cant read them. When I turn on the computer the things says:

Detecting IDE...
Master None
Slave None
Master None
Slave None

I have no idea what to do.

Im using an Abit KV7 mobo.
 
have you checked the cables... plugged in.. ?? jumpered correctly? power cable.
 
How about borrowing an IDE controller card and trying that out? Or, try the drives in another computer. If your sure they are connected right, it may be a power supply issue as well. Assuming you have the master jumpered and at the end of each chain, it should work. Try it with one drive in the system. Then if that works, add a second, etc. Your only other options are to start swapping hardware.

EDIT: Resetting the CMOS wouldn't hurt either.
 
When did this start happening? Is this a new system? New drives? Or did it start happening out of the blue? Flashing the BIOS is another option, especially if it's a new mobo. If not, djnes pretty much sumed everything else up.
 
Back
Top