Trinity laptop sometimes blue screening.

Fantasyalive

Limp Gawd
Joined
Nov 3, 2010
Messages
274
I bought my wife a refurbished HP m6-1035dx laptop over christmas which has the A10-4600m from newegg. She was having problems with WoW, some crashes and black screen when going into new zones so I updated to the newest graphics drivers. Since then WoW has run fine but in the last week and half she has seen 2 blue screens where it says some sort of error with ati drivers, haven't seen it myself so don't know exact wording. Restarting does seem to fix the problem atleast temporarly. I am curious is this a hardware problem that I should try to replace the laptop before my limited 30 return runs out, should I try rolling back to a previous driver, or maybe is it just overheating? Any suggestions would be welcome.
 
I never had heat issues with my HP DV7, but its possible. can you install realtemp or some software to monitor your temps. OCCT might do it too. If they are under 70C then id move on to a driver or hardware issue.

assuming you have a 30 day return policy, id try to get to the bottom of it quick. could be a faulty APU. Id also use the drivers from HP website versus AMD just in case.

If it were overheating i think you would notice the bottom panel hot to the touch plus loud fans. My DV7 stayed cool and was quiet unless i blocked the vents
 
I never had heat issues with my HP DV7, but its possible. can you install realtemp or some software to monitor your temps. OCCT might do it too. If they are under 70C then id move on to a driver or hardware issue.

assuming you have a 30 day return policy, id try to get to the bottom of it quick. could be a faulty APU. Id also use the drivers from HP website versus AMD just in case.

If it were overheating i think you would notice the bottom panel hot to the touch plus loud fans. My DV7 stayed cool and was quiet unless i blocked the vents

Thanks for reply, will try do both tonight. Yea, and the fact that it's a refurb has me more worried that is hardware related.
 
I would rma that in a hurry ... sounds like there's a reason it's a refurb. I hammered my 4600m with Far Cry 3 for a couple hours no problems. Make sure you've got 2 sticks of ram, the graphics can run at half speed with just 1 stick!
 
I would rma that in a hurry ... sounds like there's a reason it's a refurb. I hammered my 4600m with Far Cry 3 for a couple hours no problems. Make sure you've got 2 sticks of ram, the graphics can run at half speed with just 1 stick!

My wife has been using it pretty much using it all day since she got it. I don't think either time was during a video game. Both were either during browsing the web or watching video on the web.
 
Messed with drivers from HP but was still crashing so I went ahead and RMA'd it. Apparently while it only blue screened 3 times it had crashed and recovered 7 other times that she hadn't mentioned.
 
Back
Top