Transfering data with crossover cables. Not looking to good.

swat150

n00b
Joined
Nov 10, 2005
Messages
4
Alright, so my laptops hardrive took a dump, and now it shows the blue screen of death everytime i start it up. I can realy only go into my computer with the safe mode. I wanna transfer my data from my old laptop to my new laptop. Can I use a cross over cable in safe mode? And if so, how would i go about doing it.

Also, if I cant do that, please give me other solutions to transfer my data to my new computer in safe mode.


Thanks
 
Safe Mode w/ networking will be easiest, esp if both machines have Gig ethernet onboard. Then you don't need the crossover cable.
You'll need to assign each machine an IP, such as 10.10.10.1 & 10.10.10.2 or something similar. You'll need a Subnet mask, but you won't even need a default Gateway.
Once that is done you can try to ping each machine (makesure the firewall is turned off if this is XP SP2). Setup a share on the working machine and connect to it from your other computer. Then copy/paste to your hearts content.
If you have a desktop available to you, you can use one of these.
And 512Mb PNY ThumbDrives were going for $20 at BestBuy
 
Since it would not let me go into safe mode with networking, i used my flash drive. Its working perfectly. Thanks for the suggestion/ s.
 
swat150 said:
Since it would not let me go into safe mode with networking, i used my flash drive. Its working perfectly. Thanks for the suggestion/ s.
Also, bootable CD Operating Systems with network support and a few specific tools are extremely handy in this situation (Knoppix)

-randyc
 
Back
Top