• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Tranfer RAID 0 setup to a different PC?

I

Impact9

[H]ard|Gawd
Joined
Nov 25, 2000
Messages
1,822
I'm changing out computer cases and motherboard/CPU and I was just wondering if there is any problems changing over my RAID 0 drives to my new setup. I'm not exactly sure if I need to rebuild the array or if it will auto detect it and run as is.
 
As long as the controllers are exactly the same Brand/Model RAID controller, the transfer should be fine. On first boot you may (actually should) get a warning from the RAID controller stating there is a 'configuration mismatch'.

At this step, it should ask whether you want it to:
a.) load the configuration information from the disk array
- or-
b.) overwrite the configuration information on the array with the information from the controller.

You want to use the config from the array. If you overwrite with the info from the controller, you'll lose your data on the array.
 
You must log in or register to reply here.
Back
Top