to over/underclock or to not?

beamer7296

n00b
Joined
Nov 19, 2006
Messages
46
If my Intel Pentium-D processor is running at 800 MHz FSB and my Ram runs at 667 MHz, would it be more beneficial to my system performance to run them synchronously?

If so, do you think my ram would be able to handle 800 MHz? Or would I be better off bringing the FSB frequency down to 667? Or perhaps both raising the ram frequency and lower the fsb frequency a bit...

Thanks in advance...
 
Your computer is actually running at a speed of 200MHz times four, which gives the 800 value. The RAM frequency is derived by multiplying(or dividing) the bus speed(200MHz currently) by a certain value. If you want to run the RAM synchronously with the FSB, you'll need to increase your FSB to 333MHz, which your CPU probably won't be able to handle(though it may, depending on which CPU you have).

Your original idea of running the RAM at 800MHz wouldn't be running it synchronously with the FSB, but it would still give better performance due to the higher clock and to the fact that it would be running at a whole number multiple of the FSB. Your RAM may not be able to handle it, but I suggest you give it a shot anyways. You may need to raise the voltage to get it stable though, assuming you can get it stable altogether.
 
Back
Top