Titan SLI to Tri-Fire...

The Cobra

Supreme [H]ardness
2FA
Joined
Jun 19, 2003
Messages
4,135
Well, I read the Tri-Fire review from [H] after realizing that they had done one with the R295x2 and an R9-290x at 4K. Needless to say, I came away impressed that you are able to get such good scaling from that combo compared to the Quad-Fire setup they tested earlier with diminishing returns.

I currently have a 1200W Corsair PSU with my cpu overclocked to 4.5 with a variable voltage of 1.2 so that the CPU can downclock when I am not doing anything CPU or GPU intensive.

I could sell my Titans for around $750-$850 each on ebay from what I have seen when I perused the site for other similar cards. I would then plunk down money for an R9-290x so I could complete the tri-fire.

It has been since 2011 that I have owned an AMD/ATI card. It was a set of Sapphire 5870's running in crossfire. My main game at the time was BF2BC2, and AMD was offering great drivers until the 10.6/7 drivers came out that basically crippled crossfire performance for the next 8 months until I sold them and went back to Nvidia.

So here is my question, my main games are BF4 and STO. I plan on getting War Dogs eventually and GTA5 whenever that is released down the road. I also have a Dell U3214Q 4K monitor which I love so far. Graphics are amazing at 4K. However, when I play BF4, I have had to turn down the graphics from Ultra to High and completely turn off AA. Even at 4K it is still noticeable.

How have the drivers been with the new round of AMD cards? I have not kept up much with the new AMD/ATI cards except to read a review here or there.

If I were to purchase the new cards, I really like the XFX branded cards. Cool designs and such.

Opinions please!!! and Thank you. :)
 
The other thing that I wanted to add was that I also use Maya3d 2012. it shows the older AMD cards supported (the 5/6/7 series and supports crossfire built-in) So I would imagine that it would support the R9 series of cards.
 
I can relate to you in that I came from the land of Titan SLI also to power my 3x 2560x1440 nv surround.

I too originally was in the AMD camp with 5870, then 6970 and as lately as 7970 but when they failed to deliver the mixed resolution eyefinity I jumped to the green camp with the SLI titans.

After realizing that the titans are no better then the 780s and now with the 14.6 providing mixed eyefinity resolution. I'm back to the red side with XFX 290X DD and soon to be crossfire.

Now is a good time to jump ship as nvidia have been resting on their laurels too long and forsaking the nv surround. Also the 290x prices are dropping and AMD drivers are getting better as apparent with the mixed eyefinity support hence prompting me to jump back.
 
from a value standpoint its hard to beat a 290x.

I was watching a 290x trifire auction today on ebay that ended for 689 shipped! http://www.ebay.com/itm/261489315262?ssPageName=STRK:MEDWX:IT&_trksid=p3984.m1435.l2649

I just picked up a refrence xfx 290x off of ebay a few days ago for $300 shipped and man these suckers are hot. You will have to have a good cooling solution. May have to watercool trifire to prevent them from throttling. So in the end, if you sell both titans for 1200-1400, you might have to pay that to watercool the 290x
 
Last edited:
As an eBay Associate, HardForum may earn from qualifying purchases.
290x are definitely a great value.

Kraken G10 is a good solution for cooling them.
 
I am not going to be too worried about cooling. I am going to switch cases anyway because I purchased the Cooler Master HAF-XB Lan Box. The 295x2 is 12.5 inches long, so my current case would not hold the 295x2.

I think with enough airflow from front to back to push out excess heat, it should keep the temps down. I use a Corsair H80i cpu cooler as well that keep my 4770k at 55-60c when at a full load.

Thanks for the responses so far. :)
 
290x are definitely a great value.

Kraken G10 is a good solution for cooling them.

I actually picked up a G10. For what it is, it works great. (i've been using DWood brackets since v1.) And it definitely is a better solution than a DWood brackets. The only thing is that the 290x must have VRM heat sinks. I am running my 290x at stock right now untill the VRM heatsinks come in b/c with any OC the VRM easily reach 100c
 
Back
Top