Titan Cool Idle Heatpipe

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
You guys just have to see the size of this massive heatpipe heatsink that was reviewed by the crew at Driver Heaven today. The cooler is called the Cool Idol from Titan and the damn thing is almost as big as the motherboard it is sitting on.

After installing the Cool Idol on our P5K-VM motherboard, we came to realize just how large this cooler is. The body of the cooler floats above the CPU area, covers the entire Northbridge chip and PWM and should also cover the DIMM slots on many motherboards.
 
Looks like it would block most rear exhaust fans too. That would make it rather impractical, wouldn't it?
 
Its great if you're not planning on installing anything else BUT the heatsink on your motherboard.
 
I think you're missing the point.
All the ladies will tell you that the size of your heatsink is directly proportional to the size of your... fan... overclock... maybe? Well, at least it's quiet!
 
Didn't anyboy else notice that the 2 center heatpipes were going to a seperate smaller array of fins that is blocked by the larger fin array?

Now.. if you took the two center heatpipes and had them going up to the fin array that actually would get a decent amount of air pushed through it, it should be able to beat anything out there.

Not sure who designed it that way.. but they need to go back and fix it.

I was really surprised that they didn't mention it in the article.
 
Smart design, look how it just take the same amount of space as the I/O panel so it doesn't interfere with the video card. As for the RAM, that's to be seen.
 
well, you'd definitely be able to brag about size ;)

I thought it was hilarious that it covered damn near the whole board....BUT...the fan could easily cool the NB, memory and anything under it :)
 
I wanna see some CPU coolers with flat heatpipes, like this design on the right:

p123.jpg


I think this would probably be more effective then numerous separate heatpipes.
 
I was like wow... then a few seconds later realized how quickly this would be a awful heatsink to work with... blocking case fans, blocking devices, etc.
 
I was wondering how long it would take a company to come out with a HSF setup that was larger than the Coolermaster V10. Still doesn't match the heatpipe count of the V12 though. :p
 
They should of showed how the cooler looks installed in an actual case (one with a 120mm rear exhaust) with a dual slot video card and ram that has tall heatsinks (dominiator style) and have a picture compare its size to other coolers.

I wonder when a some large giant tower cooler will also come with supplemental load bearing brackets or whatnot.
 
I used a Coolermaster Geminii on a uATX board, it was quite an amusing sight. It basically looked like my system was powered by a heatsink when viewed through the case window.
 
When will someone design a heatsink with pipes the EXIT the case? That design just blows the heat back down on the board.
 
I'm thinking how easily the pipes would bend if you're a LAN party person and lug your case all the time and jostle it about.
 
Back
Top