• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

tighten ram timings

J

jamestime88

[H]ard|Gawd
Joined
Dec 10, 2003
Messages
1,209
i am trying to get the most performance out of my ram. i am using pc3200 kingston hyperx on a soyo kt333 dragon plus board with an athlon xp 2100+ @ 166x14 2.32ghz. i was wondering if anyone knew what settings i could change to make my ram perform better since its only running at 166mhz it should have some headroom.

these are my settings:
CAS latency = 2, changed from 2.5
bank interleave = disabled
precharge to avtive (trp) = 2T, changed from 3T
active to precharge (tras) = 6T
active to CMD (trcd) = 2T, changed from 3T
DRAM burst length = 4
dram command rate = 2T command
dram access time = 3T
dram que depth = 4 level
Dram twtr = 3T
write recover time = 3T

so what is it that i could change to make ram more efficient? should i just generally try to lower everything, or should i not mess with it? thanks for the help
 
You must log in or register to reply here.
Back
Top