Those that have the SI-128..quick question

NewShockerGuy

Gawd
2FA
Joined
Jan 24, 2002
Messages
689
Just got the Thermalright SI-128... all i can say is WOW it's big,,..
I have NEVER had a heatsink with heatpipes before so I have a question on how the pipes should face?

When you have the case standing upright how should the headsink be on? By that I mean which way should the heatpipes be facing? This is for a socket 775

Thanks so much!

-Nigel
 
I own a SI-128 and I'm also curious to know if orientation matters. Does anyone has a suggestion about how it should be oriented ?
 
i also just got an SI -128 but i have not installed it yet, however when i do i will try to install it so that the heatpipe ends are facing upwards so the fins run parallel to the top and bottom of the case (as my exhaust fan should then be able to pull some air through the fins as well). Also if you have a fan mounted on it blowing down towards the cpu the hot air will come out through th e fins towards the cpu and then rise upwards. So if the main body of the heatpipes is bellow th cpu when the case is standing upright hopefully the hot air will not drift over them.

something like this:

top of case
______________________________

__________________
__________________ / \
__________________ | |
__________________ | |
__________________ | |
__________________ hot air moves away from heatpipes
----O O----------O O

_________________________________
bottom of case

the Os are heat pipes coming up from the cpu and the lines are supposed to be fins
 
i also just got an SI -128 but i have not installed it yet, however when i do i will try to install it so that the heatpipe ends are facing upwards so the fins run parallel to the top and bottom of the case (as my exhaust fan should then be able to pull some air through the fins as well). Also if you have a fan mounted on it blowing down towards the cpu the hot air will come out through th e fins towards the cpu and then rise upwards. So if the main body of the heatpipes is bellow th cpu when the case is standing upright hopefully the hot air will not drift over them.

something like this:

top of case
______________________________

__________________
__________________ / \
__________________ | |
__________________ | |
__________________ | |
__________________ hot air moves away from heatpipes
----O O----------O O

_________________________________
bottom of case

the Os are heat pipes coming up from the cpu and the lines are supposed to be fins

Yes, that's a orientation I also thought about... a advantages : the fins should be perpendicular to the exhaust fan on the back of the case so when air is flowing across the case, it should traverse the HSF then get the hot air behind. However, you also need to consider mosfet/chipset/ram cooling and this depends on boards.

On the BadAxe2, mosfets is begging to be cooled and I'm still pondering which orientation would be the most benefical (I got the heatsink but not the board yet, will get it tonight from the post office).
 
Received my motherboard and cpu so I assembled it last evening. In the end, I decided to place the SI-128 so the pipes side (the side where the pipes is curving from the base to the fins) beside the memory sockets because this position will make the heatsink hovering all the mosfets and 1/2 the northbridge of the D975XBX2, which will help cool those components.

The fins direction is perpendicular to the power supply 120mm fan so heat will rise and get removed by the PSU and partially by the top blowhole. The 80 mm rear fan of my WaveMaster will remove some of the hot air as well. The intake is provided by a 120mm Silverstone FM121 fan after modding the front side to accept it.
 
The orientation does not affect the cooling ability of the heatpipes, they will work equally well no matter which direction the pipes are facing. Try to place the fins above the RAM chips if possible so air from the fan will blow through and cool the RAM as well.
 
My take on this:

On my Gigabyte GA-965P-DS3, the SI-128 is not symmetric, meaning the center of the CPU is not below the center of the fins. You can use this to your advantage. I found that if I point the SI-128 the right way, the fins will overhang 3/4 of the northbridge heatsink. So, my 120mm fan is blowing air onto the northbridge as well as cooling the SI-128!! However, on the other side, the SI-128's pipes were VERY close to the MB 12v power socket, and I had to bend the wires a bit to make sure they weren't pressing against the pipes.

You might look to position your SI-128 to overhang other components that you wish to cool. You probably need to experiment a bit to check what will work best on your MB.
 
Back
Top