This Is Killing Me lol

Dallas36

n00b
Joined
Apr 8, 2004
Messages
8
I am bulding a new AMD system but I cannot decide which motherboard or processer to get. I have done tons of research on the DFI lanparty ultra b, Abit NF7S V2 and The Asus Deluxe V2. I want the best gaming board but , with all the different reviews they all start blending together, so I found this forum and thought you guys could help me decide. I have really gotton into overclocking. It's fun. How much diiference is there in performace to lets say a Athlon xp 3000-400 FSB or an overclocked 2500 xp mobile processer. Will i still be able to hit 400 FSB on the 2500. Any input would be greatly appreciated. Thanks in advance
 
The Athlon 3000+ and the XP-M 2500 should perform just about the same at the same frequency, considering that they're the same chip, basically.

As far as motherboards go, I've got a good history with EPoX boards. I'm running an 8RDA3+ right now -- good overclock, for my chip (It's an "A" stepping XP-M), and plenty of features.

Others will recommend the NF7-S, I'm sure. It's a really good board both for overclocking and features.

I've also heard of a bunch of problems with the DFI boards (Infinity and LAN Party), but I've no experience with neither the ABIT or DFI boards.
 
Thanks for the info. Actually last night I was reading some reviews on the epox board and they have been mostly pretty good. I have noticed that they are cheaper also, not that it really matters. I just want a good gaming system that I can still mess with. I just bought a Koolance case for watercooling, My first one by the way. Once again thank you
 
The Asus A7N8X Deluxe R2 is a nice board, and I've not run into any of the historical A7N8X problems (hard CMOS/EEPROM lockup).

I think that the A7N8X Deluxe R2 has been replaced by the A7N8X-E Deluxe which provides a worthless (well, OK, BANDWITH LIMITED ) Gigabit Ethernet adapter.

Most of the hardcore overclockers have dumped their A7N8Xs and moved to the Abit boards.

Check http://www.NforcersHQ.Com for some of the beast information on nForce based boards.
 
Will I be able to overclock the 2500 mobile or the 2500 xp to a 400 fsb. I know all the 2500 xp come locked now and I did some research on the 2500 mobile. The mobile I see is at 266 and the xp is at 333. I am confused on which one to buy or should I just get the 3000+ 400 fsb
 
DFI NFII ULTRA INFINITY looks like a nice cheap board that can take high fsb very well according to people that use it plus it got a ton of futures. Currently I'm running a 8rda+ and i love it. Never had any problems with it and it has been running at current clock speeds for over a year now.
 
All of you have been really helpful. This is my first time in a forum and you guys are great. thanks for all the links and help. I still could not decide, not fault of you guys thats just me lol, so I bought an NFS v2 and a DFI infinity. I also bought a athlon mobile 2500 to play with and a athlon xp 3000 400 fsb. That should cover all my bases I hope. I will let you guys know how I made out. I really love that Newegg, they have great prices.
 
Oh Yeah I forgot to tell you all what I am running right now. This is why i am upgrading (not really i love to always go faster) I have a soyo KT333 with an athlon 2200 tb. O/C to 2.0. How i did that on this board i don't know just got lucky, but i have to say i have never had a problem with this board. 512 of only pny brand memory, custom built case with 5 fans. tt volcano cooler. 350 watt antec psu and a 60 gig wd hard drive. dvd and cdrw both from lite on. s/b live, gf fx 5200. A really stable system but now you see why i'm here.
 
Dallas36,
Cool, you bought 2 boards and 2 processors:D

Som people have all the luck;)

Good for you.

Make sure you understand that the power needs of a nforce2 based system are different than a via based system, so what may have worked well with a previous setup, may behave differently with a Nforce2 setup..

P.S: Did you check to Dfi and Abit forums?, they have modded bios avail for overclockers if you become intrested..

Good luck, and have fun....

Dafanman:cool:
 
I bought a tt 480 wattt power supply. Will that be enough? I also bought muskin level one 3200 222 special ram, what are your thoughts on that. I also have twinmos 3200 xms 3200 ram. 512 k of both, All I have to do now is decide which chip to put into each motherboard lol. I think the overclocking that i am gonna do I will but the 2500 in the infinity. Thanks for the heads up on the power. i hope it's enough
 
Dallas36,
Good choice on the psu;)

The ram ought to be just fine, just make sure and see this info regarding nforce2 chipsets and memory
Nforce2 memory timings analysis There are several articles out there and many threads pertaining to the way to set timings for nforce2 boards, this should give you an idea about that...

laterz,
dafanman:cool:
 
Thanks for all your help dafanman. I have got the DFI infinity up and running. That was too simple. I did not have a problem with this board what so ever. I have heard some nasty reviews but I had to find out for myself. I am gonna do a burn in test here very shortly and then after about a week or so i will start to overclock. I played a little bit and I already had it up to 2.21 ghz without breaking a sweat but i backed it back off for now until it gets broken in a little. This thing has more bells and whistles to it than you could possible imagine. All of you have been a big help and I will post my NF7s v2 results as soon as my koolance case gets here. This is what I have so far.

DFI Ultra Inf.rev a+
Athlon xpm 2500
Albratron Gforce fx 5700 256 ddr
muskin 3200 222 special DDR ram
Aspire Infinity Case(Just came out. Sweet Case)
Lite on DVD Rom
Sony cdrw
samsung 120 gig sata harddrive
Onboard sound is great
 
Dallas36,
Cool dude, good for you and I hope you have much fun when I browse the dfi forum at amdmb.com I see many that are getting 220+ fsb.

All right playa, shake it like a salt shaker,


Laterz,
dafanman:cool:
 
I have a A7N8X-Dlx V2 board. Nice board, but ASUS seemed to stop supporting it in favor the the A7N8X-E Dlx board. There has not been any BIOS updates since September of last year. It doesn't support the nVidia system utility. You cant undervolt your CPU. You can't get any multipliers higher than 12.5 with the XP-M CPU's.
 
^^^
Well, you could do a bridge mod to set the CPU for the >12.5 multiplier range.

Anyhow, the GigE controller on the A7N8X-E isn't any worse than the 10/100 controller on the A7N8X, and the nVidia Ethernet MAC is still there. *shrug*

Anyway, my vote's for the Asus, mainly because I have one myself. :)
 
Back
Top