This good?

i cant say ive heard anything good about aspire power supply. might want to look into another one.
 
You pasted the same link twice on the CPU. Both of them go to an A64 939 Venice 3200+ Retail, which is what I'd recommend anyway. You can probably OC it to about 2.7GHz fairly easily.

I'm assuming you need AGP from your current specs. The MSI nF3 Neo2 would be a better motherboard in that case.

Corsair...they've gone downhill, I'd get some Crucial or TwinMOS SP. If you're going to OC the TwinMOS SP to a very high clock speed you may need an OCZ DDR Booster to go with it as it likes higher than normal voltages, BUT on A64 memory clock doesn't mean that much anyway so just use the appropriate ratio for whatever your HT clock is to keep the memory at workable levels either way. Both of these should OC well and with very nice latency.

I tend to check for Active PFC as the first pass/fail check on a PSU. That one fails. There's a bunch of good info on PSU brands in the PSU forum.
 
A note, an OCed Venice will probably eat those games alive, especially with the 6800GT. Most of the design recommendations are to make sure the system is smooth & stable.
 
Which kind of powersupply do you recomend me to get for this set-up not sure how many I need. Also im not looking to overclock anything maybe the processor at 10% but thats all, nothing else just the processor, maybe even not.
 
Read the stickies in the Power Supplies forum.

The A64 Venice 3200+ has a stock speed of 2.0GHz, and it's pretty much a cakewalk to get it to 2.7GHz. It does that barely over stock voltage and with stock cooling, at pretty much the same temps at which it did 2.0GHz. Don't OC it if you don't want to, but it's a free and substantial performance gain for very little effort.
 
But cant it fail and cause my CPU to fry then its like throwing $200 in the garbage... or will it not fry or sumthing?
 
Extremely unlikely, especially if you follow proper procedures.

Of course if you do something silly like try and run the CPU at 1.9V or something when it really only needs like 1.55V and it makes it have idle temps of like 50 or 60C when it's supposed to be around 30 or 40...you get the idea. Perfectly safe but follow instructions. There's a guide linked in my sig that covers most of it.

Flashing your BIOS, or even physically assembling the system itself, much more risky. OC mishap, most of the time all you need is to clear the CMOS or to fix the incorrect setting. Maybe maybe reinstall Windows (although people do that WAY too much when all they need to do is fix a BIOS setting).

That MSI motherboard among other advantadges is designed with overclocking in mind and thus has a number of safetys in place to make it so most of the time all you have to do is reboot and fix the setting you put too high.
 
Quite. There's two versions of that on Newegg last I saw BTW so take your pick of whichever you think will be better. DFI makes the best A64 motherboards and MSI's the runner up, DFI just doesn't have their nF3/AGP motherboard out yet.
 
I've decided that im most likely not going to overclock my CPU, maybe just a little bit like 10% but I still dont want to deal with the risks it might give me. After doing some reasearch it looks like the asus a8v is decent board, but not too well for overclocking. While the MSI K8N Neo2 platinum is a great overclocker, but hard to get running stable.. Is this correct?

Cause I don't know too much about overclocking and things so I would'nt want to overclock my CPU then not have it running correctly. Also is the k8n really hard to get running stable or have I just heard wrong?
 
The Antec TruePower II 430W is a good value for the money. Full ATX12V v2.0 compliance (dual +12V lines, PCI-E power connections, etc) and a trusted name. Stay away from the Aspire, you're paying for the tacky bling-bling with one of those PSUs.
 
rob24 said:
I've decided that im most likely not going to overclock my CPU, maybe just a little bit like 10% but I still dont want to deal with the risks it might give me. After doing some reasearch it looks like the asus a8v is decent board, but not too well for overclocking. While the MSI K8N Neo2 platinum is a great overclocker, but hard to get running stable.. Is this correct?

Cause I don't know too much about overclocking and things so I would'nt want to overclock my CPU then not have it running correctly. Also is the k8n really hard to get running stable or have I just heard wrong?


The A8V is a VIA chipset, note the V. nForce is designed with an eye towards people who are going to be picky about speed, quality, whatever. VIA is good for office systems and such I just wouldn't use it at home by choice. Your system won't totally suck if you go with the A8V, but the MSI nF3 Neo2 is better, and not just for overclocking.

As far as I've heard the Neo2 should work with as little adjustment as anything. Really you can leave your whole system on the default settings, but it's always a good idea to go into the BIOS and adjust a few things off of "Auto". Memory timings for example run off SPD detect which isn't always very accurate. It'll usually get the stuff to run, but you can make it run faster if you tune it a little.

Like I said, the risk involved in overclocking is minimal...I have a $150 processor running faster than the most expensive model, without needing to buy anything else to accomplish it, and with no real risk. With the amount people PAY for much smaller upgrades, a large free one is an easy choice. There's that guide again, plus a large amount of collected information in these forums and elsewhere, plus if you hit a snag that you can't already find an answer to someone here can probably help solve it easily.

If you don't overclock, you should still run it through much of the same stability testing just to make sure you don't have a screwy memory module or anything. So properly speaking you already have to do a lot of the same work anyway.

If you're dead sure you're not going to OC then you don't need to get a Venice and can probably get a similar but earlier model for the same socket and save a little bit there. You also might want to get a higher-numbered chip.
 
Ok now that the motherboard is out of the way..

For the ram should I go with Corsair XMS or TwinMOS? ( 2 x 512mb)
I've always heard XMS was very good ram, but others say TwinMOS is very good also which should I go with with my set-up. I will defenitly not be overclocking this, as in I dont know anything about OC'ing ramm
 
If you're not overclocking, just get some Value RAM, Crucial's is good.

Also A64 isn't like Intel, you can OC the CPU but not the memory. And everyone has to start with knowing nothing at all about the topic, and educate themselves from there.
 
Back
Top