this a good raid card for SATAII?

I had the 8-port version. It was decent: stable, but slow. If you want speed, get this card for just a little bit more. See Provantage or eBay to save a little more.
 
I don't know why some people find the 3ware controllers slow. They are plenty fast for running four traditional HDDs in RAID-5.
On the other hand, for RAID-0 with either traditional HDDs or SSDs, the 9650SE is a bit lacking in performance.
In general, 3ware cards excel in a multi-user environment under a heavy I/O load, while some people seem to find them a bit lacking in a single user environment with a minimal I/O load.

Though I am getting near perfect scaling with four 2TB Hitachi 7K2000 in RAID-5 on my 9650SE-8LPML, so I don't know what more you can expect.

If you want something faster, LSI just released an updated 3ware card with SAS 6Gbps, the 3ware 9750.
Maximum Rated RAID-5 Read: 2500MB/s
Maximum Rated RAID-5 Write: 1100MB/s
*this is the first LSI built 3ware card since they bought them out

LSI also sells their own branded SAS 6Gbps card, the MegaRaid 9260.
Maximum Rated Read: 2875MB/s
Maximum Rated Write: 1800MB/s
*people with SSDs seem to love this card
 
Last edited:
I don't know why some people find the 3ware controllers slow. They are plenty fast for running four traditional HDDs in RAID-5.

Possibly, I found scaling nowhere near linear with an 8x1TB RAID-5 array. It might well be for 4 HDDs. I agree the OP would be more future-proof with something like the LSI 9260-4i.
 
This will be used in a heavily multi user environment. So the things I'm looking for are performance under load and very low chance of a loss of data.

I noticed the LSI card works with both SATA and SAS drives, I like that. Would it handle 4 2tb drives well? I assume I'd have to get an expander cable (which is fine as well).
 
Back
Top