Think this enermax psu will cut it?

blazemonkey

Limp Gawd
Joined
Apr 20, 2006
Messages
159
I'm upgrading my system here on a per-part basis. for now i'll be keeping my trusty 465w psu enermax psu. ive been running it on a very stable gaming system with a barton 2800 and radeon 9700 pro for a few years, and now a radeon x700. ive had no power related problems and i almost never hear the fans on the psu speedup unless it gets warm in the house. im in pretty bad need of an upgrade to play some of the newer games like cod4, crysis, and even cs:s! so i think i found a pretty sweet deal.

soon im getting a slightly used athlon x2 4200 and mobo for $125 from a buddy at work and im going to throw in 2GB of ram, a radeon 3870, my existing audigy 2 and 2 320GB HDD's. from what ive read, the x2 4200 will draw around 30 watts LESS then my old barton chip and and new video card will draw around 50 watts more, at full loads. in this review, a system of similar consumption to my new build is only pulling 270w from the wall, im pretty sure my psu can handle this for short term.

the one issue i see is the 6-pin pcie connector the 3870 requires. i dont have this connector on my psu but ive seen adapters i can use with my existing 4-pin molex connections i cant see this being a problem as long as the card gets the proper voltage.

before the end of the year i'll probably get a new 1000w psu. maybe a new motherboard if future sockets will support my x2 4200 plus newer cpu's next year. (i guess you can see i like to take baby steps in my gaming rigs upgrade path) :p

so give me your input guys, im excited to get this system built, i think it will handle it well even with this aging psu.
 
How much amperage do you have on the 12 volt rail? As long as you have enough power there you should be ok.
 
It probably will only need 300 watts, but superdemon questions stands, how is the 12v rail rated. His old system was much more 5v and 3.3v based compared to his new system, and since this is an old psu he's using, it may not have enough power on the 12v rail for a newer cpu and a 3870 graphics card.
 
I looked around for 465w enermaxs and the one I found had 33a on the +12v. Thats plenty for your setup. Not to mention enermax makes great psus, so no worries at all my friend.
 
great, thanks for the info guys. i'll report back when i get it together and let u know how its running.
 
hey guys. as i said, im reporting back :D

i got the system built on monday and for the most part its running like a dream. heres what i have in it:

Enermax EG465P-VE
Gigabyte GA-M55SLI rev.2
Athlon 64 dual core x2 4200+ AM2
2 GB Corsair XMS2 DDR2 @ 800MHz 4-4-4-12
Diamond Radeon HD3780 "Ruby" Edition
WDC 3200JB, WDC 1600JB
3x80mm case fans

So basically the system is running great. everything installed and runs without a hitch. basically just xp pro x86, obviously newest drivers for everything and bios for the mb. also installed amd's dual core optimizer and im also running with no page file at the moment. simply put, all my games are running amazingly faster then my previous build. so far ive tested CSS, TF2, bioshock, doom 3, HL2ep1/1, and far cry. all these games are completely fluid with all in game settings maxed and 1600x1200, 8xAA, 16xAF and v-sysnc. ive even run prime95 for 10 hours straight twice when i was at work and there were no errors. ran memtest86 for hours and all was good.

the only issues i've had are during posting, and it only seems to happen 1 in 10 times. sometimes the system wont post, monitor stays on standby, no beep or anything. sometimes the monitor will come on and it shows the first few lines of the bios before the ide info comes up and it hangs. it doesnt happen very often, like i said 1 in 10 times or less, doesnt seem to mater if its a cold boot or a regular system reboot. it doesnt appear to be happening as frequently anymore but otherwise the system has been 100% rock solid with everything i've thrown at it and i think i've tortured it enough.

im thinking this is psu related since the motherboard has a 24pin atx power connector and my psu only has 20pins on the atx connector. the motherboard manual says either can be used and even has a plastic cap to cover the 4 empty pins. also, the video card has a 6-pin connector that goes to double ended male molex connectors, damn thing is taking up 2 molex power connectors on the same rail.

im thinking of upgrading the psu within the year. most likely the Enermax Infiniti 720w due to modular connectors and the great review on [H], also ive been very happy with the 2 enermax's ive owned.
 
Congrats on the new build, and yes, that PSU is more than enough as you've already figured out. Heck, mine is only rated a few watts higher than yours with a significantly greater load, so you're definitely ok, you don't need to upgrade unless you've got money burning a hole in your pocket as you're not even stressing that PSU at all with that current setup.

As far as the occassional posting issue, I had that happen a few times on my previous build. My issue was a flash drive that I had hooked up, once I removed it everything booted up just fine.
 
Reguardless of what the previous posters have said, I would recommend you replace the PS when you can afford it. I've discovered older well used PS's can't put out there 100% rated power anymore due to what is called "capacitor aging". My old antec true 550 was 6 years old and had a bulging cap in it so it had to be replaced. It's true some older supplies may work good, but some may be on the edge of failure - you dont want a PS to blow and take your whole system with it. :eek:

Just my 2 cents
 
well, i dont really have much money to burn a hole in my pocket, but i do plan on upgrading the motherboard and cpu next year. so getting a new psu will be inevitable since this one will be set to rest in a light duty system until it dies. as for the boot issue, i havent seen it happen in the last 4 days now so im not too worried. esides the system will be always on and only gets rebooted once or twice a week if im actually gaming, i really only shut it off and unplug it if i leave for 2 or more days. otherwise i've had over 40 days of uptime on the last build lol.

and here are some pics of the new system. and theres my old system on the far right

yes, im going to blow some of that dust out asap :p
 
Hey guys, just FYI this configuration has been running well now for 7 months. i ended up replacing the the PSU today only because i'm going to be doing some major upgrading soon, and i dont want to push my luck with this older unit. this 6 year old enermax has been so good to me, so i ended up getting another enermax. i got the infiniti 720w since it was highly recommended in this review. :)
 
Glad it worked well for you, I personally had zero doubt that it would. Out of curiousity what upgrades are you planning? I think I've done a few since my post in this thread but I'm still on my Enermax. Must admit, I do feel like I'm pushing it slightly but thus far have had zero problems with it. My case configuration would require me to remove my HSF to replace the PSU and removing the HSF requires removal of the board. I'm not about to do all that so hopefully the trusty Enermax will hold up until I'm ready for a new build.
 
I'm upgrading everything, starting with four 1TB drives. I think i'll wait to see what amd's next line of cpu's can do, then replace the motherboard, cpu and ram.
 
Back
Top