Thermal Paste

_randies_

n00b
Joined
Oct 3, 2006
Messages
42
What is the best method to remove it completely before reinstallation? (intel stock e6600 cooler)

Thanks
 
90% isopropyl alcohol works well. Carefully wipe all the old paste off the cpu and hsf/waterblock and you should be fine.
 
articlean is good, but 90% isopropyl alcohol does the job as well, plus it's cheap and readily available at your local drug store. oh and be sure to apply whatever you use to clean it with something that is relatively lint free, i personally use coffee filters.
 
i have a e6600 + stock cooler too i used 90% isopropyl and a coffee filter.
 
how about a little paint thinner ? is that too extreme?
 
how about a little paint thinner ? is that too extreme?

Yeah... that's way too extreme, and would likely do nothing other than royally fuck things up. At the very least, paint thinner will leave a residue that you don't want... at the least.... Isopropyl alcohol works just fine.
 
When I've had to clean the stuff off I use 91% isopropyl and coffee filters. The filters are lint free, and cheap... Works well!
 
how about a little paint thinner ? is that too extreme?

Ummm.....yeah, I'm gonna have to go ahead and say no to any solvent-based cleaner. You could easily destroy circuit traces.

Like the others said, high-purity alcohol works great. Coffee filters work great, Q-tips will do the trick also (as long as they're wet - dry ones can leave fibers). I recently switched to foam-tipped swabs and they work very well.
 
Back
Top